Super Nova 1 LED Module Daylight White 145°, 1.4W 12VDC

Mean Well Plug-in LED Power Supply 60W - 12VDC

SKU: PS-MW-60-12     View Product Page
A high quality Mean Well brand three prong Wall plug, 60 watt Constant Voltage LED Power Supply which is suitable for dry locations and is capable of supplying power to 54 - 1 watt led modules or lights. Use with any 100-240VAC input for a quick and easy installation of your 12VDC LED Strip Lights, LED Modules, and LED Lights. Comes with short circuit, overload, over voltage and over temperature shut off protection. It has a 5.5mm X 2.1mm Female Plug for the 12V connection. It can be used to connect LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other LED Lighting products. One 5.5 X 2.1mm Male Barrel Jack with screw down terminals included. UL, RoHs and CE approved.

Mean Well Waterproof LED Power Supply 60W - 12VDC

SKU: PS-MW-60-W-12     View Product Page
This 60 Watt Constant Voltage LED Power Supply by Mean Well is suitable for wet or dry locations and is capable of supplying no more than 60W or 5 Amps of 12VDC power output. This AC/DC transformer takes a 100-240VAC input and converts it to a 12VDC output for a Class 2 rating. Built in overload, and over voltage protection protect this power supply from incorrect installation. Use this Mean Well LED Power supply to power 12VDC constant voltage LED Strip lights, LED Modules, or any other LED product with a 12VDC rating. The IP67 water-resistant rating is not intended for direct exposure to outdoor elements. UL recognized, class 2, and LPS approved.

Mean Well LED Power Supply, 75W - 12VDC

SKU: PS-MW-75-12     View Product Page
A Mean Well 75W 12VDC LED Power Supply / Transformer, with an AC input of 100-240VAC and 12VDC output through one terminal. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload and over voltage protection gaurds the unit from any improper use. It can be used to connect 12VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 12VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 70 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.

Mean Well LED Power Supply Two Output 100W - 12VDC

SKU: PS-MW-100-12     View Product Page
A 100W Mean Well 12VDC LED transformer / power supply, 100-120VAC or 200-240AC input and 12VDC output through two terminals. Built in short circuit, overload, and over voltage protection make this power supply long lasting and dependable. For dry locations only. Has screw down style connections. It can be used to connect LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other LED Lighting products. ULRecognized, RoHs, and CE approved. Can connect up to 90 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.

Mean Well Waterproof LED Power Supply 100W - 12VDC

SKU: PS-MW-100-W-12     View Product Page
This product is a 100W Mean Well Brand, 12VDC LED transformer / power supply, 100-240VAC input, with 12VDC output. IP67 rated for wet or damp locations. Has one 10" long 12VDC output connection that can be used to power 12VDC Constant Voltage LED Modules, LED Lights, LED Light Strips, RGB LED lighting and other 12VDC Constant Voltage LED Lighting products. Comes with built in short circuit, overload, and over voltage protection. 100-240VAC input wire colors are as follow: Brown - Load, Blue - Neutral. Output wires are Black - DC negative and Red - DC Positive. This AC/DC transformer can connect up to 90 one watt led lights. Non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.

Mean Well Waterproof LED Power Supply 192W - 12VDC

SKU: PS-MW-240-W-12     View Product Page
This product is a Mean Well brand 192W, 12VDC LED transformer / power supply, 100-240VAC or 277VAC input, with 12VDC, 16A output, IP67 rated for wet or damp locations. Has one 10" long 12VDC output that can be used to power 12VDC Constant Voltage LED Modules, LED Lights, LED Strip Lights, RGB LED lighting and other 12VDC LED Lighting products. Comes with built in PFC (Power Factor Correction) as well as short circuit protection. Non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.

Mean Well Waterproof LED Power Supply 480W - 12VDC

SKU: PS-MW-480-W-12     View Product Page
This product is a waterproof IP65 rated Mean Well brand 480W, 12VDC LED transformer designed to convert 100-240VAC or 277VAC power to 12VDC. With a 40A maximum output this transformer can drive up to 480 watts of 12VDC constant voltage LED lights. Cooled by free air convection this power supply doesn't require a noisy fan for cooling and can be used in indoor applications where fan noise is bothersome. The 100-240VAC input requires a minimum of a 7 amp circuit to carry the current on full load and the 277 would require at least 2.9 amps. The 3 conductor AC input wire (18AWG) and both 2 conductor DC output wires (14AWG) are 11.5" long and require a bare wire connection. It is recommended that each DC output drives no more than 20 amps of current. Each Mean Well HLG-600H-12A transformer is equipped with built in PFC (Power Factor Correction), short circuit, over current, over voltage, and over temperature protection and can withstand a 5G vibration test. This product is intended for indoor / outdoor use, non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.

Mean Well LED Power Supply CV 600W - 12VDC

SKU: PS-MW-600-12     View Product Page
This Mean Well 600W, 12VDC LED Power Supply / Transformer, has a 100 - 240AC input and 12VDC output. For dry locations only. Built in short circuit, overload, over voltage, and overheating protection allows for system shutdown upon any of these circumstances. Forced air cooling by built in DC fan allows for cool operating temperatures. Note: The cooling fan runs noisy and may not be suitable for all applications. Working temperatures are -4°F through 140°F. CN3 port allows for remote control of this power supply. It can be used to connect large amounts of LED Lights, LED Light Ribbons, RGB LED lighting and any other 12VDC Constant Voltage LED Lighting products. UL Recognized and CE approved. Can connect up to 540 watts of 12VDC LED lights. Only install face up with sufficient breathing space.

Waterproof Mini LED Dimmer With RF Remote, 5-24VDC 15A

SKU: LC-LF-27DIM     View Product Page
Our IP68 rated Waterproof Mini LED Dimmer with RF Remote is an amazing 5-24VDC LED dimmer that provides smooth LED dimming from 5-100%. Don't let the small size fool you this controller boasts 15A of maximum output power or 75W at 5VDC, 180W at 12VDC, and 360W at 24VDC. The 16AWG bare wire leads make connecting your dimmer simple for any indoor or outdoor 5-24VDC Constant Voltage installation. The RF remote has a number of pre-set dimming levels for quick and easy dimming. Dimming levels will be remembered when 5-24VDC is turned off and back on. An IP68 rating makes this product waterproof for any outdoor LED project but is not designed to be submersed or directly exposed to outdoor elements. Each RF remote includes one 3V CR2025 battery for operation.

Waterproof Mini LED Dimmer With RF Remote & 8 Modes, 5-24VDC 12A

SKU: LC-LF-23DIM     View Product Page
Our IP68 rated Waterproof Mini LED Dimmer with RF Remote is an amazing 5-24VDC LED dimmer that provides smooth LED dimming from 5-100% as well as 8 built in flashing and strobe modes with speed adjustment. Don't let the small size fool you this controller boasts 12A of maximum output power or 60W at 5VDC, 144W at 12VDC, and 288W at 24VDC. The bare wire leads make connecting your dimmer simple for any indoor or outdoor 5-24VDC Constant Voltage installation. The RF remote has a number of pre-set dimming levels for quick and easy dimming. Dimming levels or current mode will be remembered when 5-24VDC is turned off and back on. An IP68 rating makes this product waterproof for any outdoor LED project but is not designed to be submersed or directly exposed to outdoor elements. Each RF remote includes one 3V CR2025 battery for operation.

LED Pro Dim 5 Zone LED and Incandescent Dimmer System, 12-32VDC

SKU: LC-KT-DIM5-KIT     View Product Page
This unique professional quality wireless dimming system can dim LED lighting systems in 5 zones or areas. The RF remote control has 5 selectable channels, each channel can be connected to an unlimited number of Receivers. Each low voltage LED Receiver can connect 10A of 12 - 32VDC LED lighting product. 32 dimming levels from 5-100% brightness gives the user plenty of dimming choices. Each high voltage Triac Receiver can dim your incandescent or high voltage lighting up to 250W at 110VAC or 500W at 220VAC. This allows you to turn off or dim 5 areas or zones of LED and incandescent lights mixed or in different zones. 12VDC - 120W; 24VDC - 240W; 32VDC - 320W Max LED lighting connection to each receiver. Each item is sold separately. You can buy additional receivers as needed for your system. Remote requires on CR2032 Battery, one included.

8 Zone LED Sync Dimmer and Receiver Kit, 5-24VDC 18A

SKU: LC-LT-DIM1-KIT     View Product Page
The 8 Zone LED Sync Dimmer and Receiver kit uses the most advanced 2.4GHZ RF wireless transmission technology. Sync an unlimited amount of 18 Amp Dimming LED Receivers to up to 8 different zones within the 100ft RF Control Signal radius to create amazing synchronized dimming effects in multiple locations. Easily control each zone individually, in groups, or all zones as one through the remote keypad. The controller comes with four brightness shortcut uptions, two scene saving buttons and brightness adjustments using advanced PWM (pulse width modulation) control technology to create smooth dimming with no flickering (Note: Lowest Dim level ≈ 10%). A unique circle touch pad enables a wide range of dimming control. 8 number keys allow for 8 quick and easy zone control options with the ability to sync an unlimited amount of receivers to any zone. Maximum output of 6 amps per 3 channels for a combined output of 90W at 5VDC, 216W at 12VDC, or 432W at 24VDC. Each kit includes one 8 zone dimming remote and one receiver, additional receivers sold separately.

2 Conductor DC Connection Wire Red/Black Pair - 22AWG

SKU: LA-SS-DC22     View Product Page
This is a 22 American Wire Gauge DC Connection wire with a Red/Black bonded pair. This connection wire is suitable for connecting LED lighting products using DC electrical Current.

2 Conductor DC Connection Wire Red/Black Pair - 18AWG

SKU: LA-SS-DCW     View Product Page
This is an 18 American Wire Gauge DC Connection wire with a Red/Black bonded pair. This connection wire is suitable for connecting LED lighting products using DC electrical Current.

2 Conductor Outdoor and Waterproof Wire - 18AWG

SKU: OA-SC-2C     View Product Page
This is a 2 conductor outdoor and waterproof stranded wire, made for use with any of our single color indoor or outdoor rated LED lighting products. Use this 18AWG stranded wire with our strip lights, modules, wall washers, or any low voltage DC system. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.

2 Conductor Direct Burial Wire - 18AWG

SKU: OA-AX-2C     View Product Page
This is an 18AWG, 2 conductor stranded copper wire designed for direct burial but can also be used for any indoor or outdoor lighting project using voltage up to 300V RMS. Wires are sold in 10ft and 50ft lengths and will be shipped in one piece when available (1,000ft max). Each stranded pair is coated in a PVC material with a 2 ply water swellable tape and sunlight / moisture resistant PVC jacket to protect from the harshest outdoor elements. This product is designed to be operated in temperatures from -4° ~ 140° F and is not designed for underwater or long term submersed applications. This wire is UL and ETL Listed.

(10) Solder Seal Waterproof Heat Shrink Butt Connectors, 14-16AWG

SKU: OA-AM-HS-16-10     View Product Page
Our waterproof heat shrink butt connectors are an extremely handy product when it comes to joining two 14-16AWG wires together with a watertight seal. No need to solder wires or use bulky connectors that may eventually shake loose. These connectors are easy to use and create a permanent conductor between your two wires. No need to crimp, just use a heat gun. The dual wall polyolefin heat shrink needs a temperature of at least 176°F and has a 2:1 shrink ratio. The solder ring which provides the conductivity starts to melt at 280°F. These connectors can be used both indoors and outdoors and thanks to the red hot melt adhesive they provide a water tight seal. They are ideal for any indoor or outdoor wiring project including landscaping, cars, boats, RV's and daily home wiring. Purchase our black heat shrink strips to provide a clean and professional look when using insulated wire, see our product video for instruction of use.

(10) Solder Seal Waterproof Heat Shrink Butt Connectors, 18-22AWG

SKU: OA-AM-HS-22-10     View Product Page
Our waterproof heat shrink butt connectors are an extremely handy product when it comes to joining two 18-22AWG wires together with a watertight seal. No need to solder wires or use bulky connectors that may eventually shake loose. These connectors are easy to use and create a permanent conductor between your two wires. No need to crimp, just use a heat gun. The dual wall polyolefin heat shrink needs a temperature of at least 176°F and has a 2:1 shrink ratio. The solder ring which provides the conductivity starts to melt at 280°F. These connectors can be used both indoors and outdoors and thanks to the red hot melt adhesive they provide a water tight seal. They are ideal for any indoor or outdoor wiring project including landscaping, cars, boats, RV's and daily home wiring. Purchase our black heat shrink strips to provide a clean and professional look when using insulated wire, see our product video for instruction of use.

(10) 2 Pole Clamp Down 2 Wire Connector

SKU: LA-LU-BC-2B-10     View Product Page
This 2 pole clamp down connector is an easy to use 2 wire connector for mating or extending 2 pair 12-28AWG wire carrying AC or DC current. This connector can be used for both low and high voltage not exceeding 32A or 250V. Use two connectors for RGB wire connections or one connect to connect DC power, 2 wire AC power cords or to the input of your LED power source as well as LED Lights to the output of your transformer. See thumbnail images for reference. This product is sold in packs of 10 connectors.

(10) 2 Way Clamp Down Wire Connector

SKU: LA-LU-BC-2P-10     View Product Page
This 2 way clamp down connector is an easy to use single wire connector for mating or extending 16-22AWG wire. This connector can be used for both low and high voltage not exceeding 250V. Use to connect power cords to the input of your LED Transformer as well as LED Lights to the output of your LED Transformer. See thumbnail images for reference. This product is sold in packs of 10 connectors.