SKU: PS-MW-480-W-12
This product is a waterproof IP65 rated Mean Well brand 480W, 12VDC LED transformer designed to convert 100-240VAC or 277VAC power to 12VDC. With a 40A maximum output this transformer can drive up to 480 watts of 12VDC constant voltage LED lights. Cooled by free air convection this power supply doesn't require a noisy fan for cooling and can be used in indoor applications where fan noise is bothersome. The 100-240VAC input requires a minimum of a 7 amp circuit to carry the current on full load and the 277 would require at least 2.9 amps. The 3 conductor AC input wire (18AWG) and both 2 conductor DC output wires (14AWG) are 11.5" long and require a bare wire connection. It is recommended that each DC output drives no more than 20 amps of current. Each Mean Well HLG-600H-12A transformer is equipped with built in PFC (Power Factor Correction), short circuit, over current, over voltage, and over temperature protection and can withstand a 5G vibration test. This product is intended for indoor / outdoor use, non-submersible, non uv-proof, UL recognized, RoHS, FCC and CE approved.
| SPECIFICATIONS | |
| Model | 480W, 12VDC Waterproof LED Power Supply |
| SKU | PS-MW-480-W-12 |
| Dimensions | 11.02"L x 5.67"W x 1.91"T 11.5" Lead Wires |
| AC Input Voltage | 100 - 240VAC 277VAC (North America Only) |
| DC Output | 12VDC / 40A |
| Output Watts Max | 480 Watts |
| Rating | IP65 |
| Operating Temp | -40 ~ 158°F |
| Warranty Period | 1 Year |
2 Conductor Outdoor and Waterproof Wire - 18AWG
SKU: OA-SC-2C View Product Page
This is a 2 conductor outdoor and waterproof stranded wire, made for use with any of our single color indoor or outdoor rated LED lighting products. Use this 18AWG stranded wire with our strip lights, modules, wall washers, or any low voltage DC system. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.
Ribbon Star Ultra 2 White Strip Light Silicone WP CRI 90 2110 chip UL 12VDC - IP65
SKU: RL-SC-UT12-W-T-3M View Product Page
Our high quality CRI 90+ UL Listed Ribbon Star Ultra, White flexible waterproof LED Strip Light is enclosed in a heavy duty silicon coating for an IP65 rating, making this LED Strip water-resistant (non-submersible), dust and UV proof. Each 118" (3m) ribbon has a male water-resistant connector on one end and a female connector on the other end for easy connection. Comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. 4 SMD LEDs per 0.4" and 49 Watts are required for this 118" strip. This LED Ribbon strip is extremely bright, so bright it can directly replace T-8, T-10 and T-12 Fluorescent bulbs in light boxes, monument signs and can signs. It can also be used for overhead lighting, house eves, under stairs, outdoor lighting and any other application requiring an ultra bright weather-proof LED Strip Light. Comes with 10 clear plastic screw down holders, 4 closed end caps, 4 end caps with holes for wiring, and a waterproof connector at each end. We recommended that you mount this strip to steel or aluminum, for a good heat sink. This product requires a 12VDC Constant Voltage power source. 5750-6250K color temperature. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.
Ribbon Star Ultra 2 Warm White Strip Light Silicone WP CRI 90 2110 chip UL 12VDC - IP65
SKU: RL-SC-UT12-WW-T-3M View Product Page
Our high quality CRI 90+ UL Listed Ribbon Star Ultra, Warm White flexible waterproof LED Strip Light is enclosed in a heavy duty silicon coating for an IP65 rating, making this LED Strip water-resistant (non-submersible), dust and UV proof. Each 118" (3m) ribbon has a male water-resistant connector on one end and a female connector on the other end for easy connection. Comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. 4 SMD LEDs per 0.4" and 49 Watts are required for this 118" strip. This LED Ribbon strip is extremely bright, so bright it can directly replace T-8, T-10 and T-12 Fluorescent bulbs in light boxes, monument signs and can signs. It can also be used for overhead lighting, house eves, under stairs, outdoor lighting and any other application requiring an ultra bright weather-proof LED Strip Light. Comes with 10 clear plastic screw down holders, 4 closed end caps, 4 end caps with holes for wiring, and a waterproof connector at each end. We recommended that you mount this strip to steel or aluminum, for a good heat sink. This product requires a 12VDC Constant Voltage power source. 2600-3100K color temperature. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.
Note: * Indicates a required field
- There are currently no reviews for this product
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
