SKU: OA-GW-CON-1
Our black nylon cable jumper can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your 1-4 conductor LED wiring. Each end has an M20 x 1.5 type connector with a rubber grommet designed to seal any of our 0.2" - 0.35" diameter cables. Inside each jumper is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 16A 450VAC max rating. The design of the clamping rubber grommet creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout. This easy to use connector makes combining two pieces of wire quick and effortless for a secure and permanent wire connection.
| SPECIFICATIONS | |
| Model | Waterproof Wire Jumper, 1-4 Conductor |
| SKU | OA-GW-CON-1 |
| Dimensions | 3.0" x 0.97" x 0.97" |
| Wire Diameter | 0.2" - 0.35" |
| Max Ampere/Voltage | 16A 450VAC |
| Operating Temp | -4° ~ 212°F |
| Rating | IP68 |
2 Conductor Outdoor and Waterproof Wire - 18AWG
SKU: OA-SC-2C View Product Page
This is a 2 conductor outdoor and waterproof stranded wire, made for use with any of our single color indoor or outdoor rated LED lighting products. Use this 18AWG stranded wire with our strip lights, modules, wall washers, or any low voltage DC system. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.
4 Conductor Outdoor and Waterproof Wire - 18AWG
SKU: OA-SC-4C View Product Page
This is a 4 conductor 18AWG encased outdoor and waterproof wire, made for use with our stainless steel IP68 junction boxes or any other indoor or outdoor LED lighting project. Use this wire with our underwater and outdoor RGB LED fixtures, Strip Lights, Modules, or any other low voltage DC system. If used properly with our junction boxes this wire can be be fully submersible and dust concealed to supply an RGB Control signal to as many fixtures as your junction box will allow. This wire is also a great option for any indoor or outdoor RGB LED projects requiring a 4 conductor encased wire. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.
Waterproof Wire 2 Port Junction Box, 1-4 Conductor
SKU: OA-GW-CON-2 View Product Page
Our black nylon waterproof 2 port junction box can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing grommets will work on any 0.2" - 0.35" diameter cables. Inside each junction box is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 24A 450VAC max rating. The design of the clamping rubber interior creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout.
Waterproof Wire 3 Port T Connector, 1-4 Conductor
SKU: OA-GW-CON-3 View Product Page
Our black nylon waterproof 3 port junction box can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing grommets will work on any 0.2" - 0.35" diameter cables. Inside each junction box is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 24A 450VAC max rating. The design of the clamping rubber interior creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout.
Waterproof Wire 4 Port Connector, 1-4 Conductor
SKU: OA-GW-CON-4 View Product Page
Our black nylon waterproof 4 port junction box can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing grommets will work on any 0.2" - 0.35" diameter cables. Inside each junction box is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 24A 450VAC max rating. The design of the clamping rubber interior creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout.
Waterproof Wire 8 Port Connector, 2-5 Conductor
SKU: OA-GW-CON-8 View Product Page
Our black nylon waterproof 8 port junction box can be used with our outdoor waterproof 2, 4 and 5 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing glands will work on any 0.25" - 0.35" diameter cables. Use with our 8 port lever wire nuts (sold separately) for quick and easy connections. The design of the clamping rubber interior creates a tight and enclosed seal without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout. Each junction box includes 4 rubber plugs in order to use 4-8 of the available wire ports.
Note: * Indicates a required field
Awesome but may test your patience
These things are really cool! At the ports where you send your wires through, there is a piece that you turn which compresses a gooey washer type thing in towards the wires until it is form molded around them. Works to waterproof and also reduce tension at the wire connections. The only issue I had with these ones was the actual wire connector that is inside of these. You basically have to use it because most other wire connecting things won't fit inside the tube. The problem with the wire connector is the little screws that screw in to hold the wires in place were screwed in so tight it was literally impossible to unscrew them to actually put the wires in the holes and make the needed connections. This was the case for almost half of the ones we ordered. Luckily, I ended up changing up the wiring plan a bit last minute which meant we didn't need the ones we can't use anyway. Overall these are a great idea and I do recommend, but be ready to wrestle with some of them.
Jan 18, 2020 | Nadine
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
