Super Nova 4 LED Module Blue

Ribbon Star Max, Waterproof Blue LED Strip Light - UL 12VDC - 118" (3m)

SKU: RL-SC-RSM-T-B-3M     View Product Page
The UL Listed Ribbon Star Max Waterproof flexible LED Strip Light is a perfect solution for both indoor and outdoor backlight and ambient light applications. The Waterproof Ribbon Star Max LED Ribbon is fully encased in a waterproof coating for an IP67 rating. This 118" (3 meters, 2" under ten feet) ribbon can be cut every one inch. Ribbon comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. Each roll comes with 10 clear plastic screw down holders, 4 closed end caps, 4 end caps with holes for wiring, and a waterproof connector at each end. Three (3) SMD LEDs per one inch, 2.92W per foot of Constant Voltage DC power required for this strip of light. Can be used for outdoor lighting, decks, patios, coves lighting, toe kicks, under cabinet, backlighting, crown molding and many more applications. This LED Strip is UL Listed for class 2 low voltage luminaries and fixtures, RoHS and CE approved.

Mean Well Waterproof LED Power Supply 60W - 12VDC

SKU: PS-MW-60-W-12     View Product Page
This 60 Watt Constant Voltage LED Power Supply by Mean Well is suitable for wet or dry locations and is capable of supplying no more than 60W or 5 Amps of 12VDC power output. This AC/DC transformer takes a 100-240VAC input and converts it to a 12VDC output for a Class 2 rating. Built in overload, and over voltage protection protect this power supply from incorrect installation. Use this Mean Well LED Power supply to power 12VDC constant voltage LED Strip lights, LED Modules, or any other LED product with a 12VDC rating. The IP67 water-resistant rating is not intended for direct exposure to outdoor elements. UL recognized, class 2, and LPS approved.

2 Conductor DC Connection Wire Red/Black Pair - 18AWG

SKU: LA-SS-DCW     View Product Page
This is an 18 American Wire Gauge DC Connection wire with a Red/Black bonded pair. This connection wire is suitable for connecting LED lighting products using DC electrical Current.