The Ribbon Star 5050 TPU Waterproof flexible LED Strip Light is a perfect solution for both indoor and outdoor backlight and task lighting applications. The UL Listed Waterproof Ribbon Star 5050 LED Ribbon is fully encased in a TPU (Thermoplastic Polyurethane) coating for an IP68 rating. This 118" (3 meters, 2" under ten feet) ribbon can be cut every two inches. Ribbon comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. Each roll comes with 10 clear plastic screw down holders, 4 closed end caps, 4 end caps with holes for wiring, and a waterproof connector at each end. Three (3) 5050 SMD LEDs per 2", 4.6W per foot of Constant Voltage DC power required for this strip of light. Can be used for outdoor lighting, decks, patios, coves lighting, toe kicks, under cabinet, backlighting, crown molding and many more applications. UL Listed for class 2 luminaries and fixtures, RoHS and CE approved, 6000-6500K Color Temperature. This product is not intended to be submersed for extended periods.
|Click For Product Data Sheet|
|50/50 Waterproof 12V Connection Guide|
|LED Strip Light Comparison Guide|
|Click For Electrical Load Calculator|
|Model||Ribbon Star 5050 Waterproof, White, 118" (3m)|
|Dimensions||118" x 0.52" x 0.28"H|
|Connection Type||2 Wire (+/-)|
|LED Chip Type||5050|
|LED Quantity||3 SMDs per 2 inch|
|LEDs Per Strip||180 SMD LEDs|
|Input Power||12VDC Constant Voltage|
|Watts||4.6W per foot|
|Max Serial Connection||20 Feet|
|Certification||UL Listed, RoHS, CE|
|Product Lifetime||50,000 Hours|
|Warranty Period||2 Years|
For B2B or Large Quantity Price Info Click Here
TPU End Cap for Single Color Waterproof LED Strips
SKU: RA-SC-RS-EC View Product Page
This TPU (Thermoplastic Polyurethane) end cap is made to cap the end of your single color Ribbon Star LED Strip Lights with TPU coating. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip.
TPU End Cap with hole for Single Color Waterproof LED Strips
SKU: RA-SC-RS-ECH View Product Page
This TPU (Thermoplastic Polyurethane) end cap with holes is made to cap the end your waterproof strip light while allowing connection wires to pass through. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip wire connections.