6803 IC Type DMX to Digital Decoder, 5-24VDC 512CH
Product Description Close Description
This LED DMX Decoder converts a DMX control signal to an SPI digital signal compatible with 6803, 1101, 705, 6909, and 6912 type IC LEDs. This product will work with 5-24VDC digital pixel lights, strip lights, or modules with any compatible IC chip mentioned above. This product will not work with any other type of LEDs not mentioned above. Outputting an entire 512 channel DMX universe this decoder can control up to 170 RGB fixtures with compatible IC chips. This product accepts both XLR3 and bare wire connections for DMX input and output. Built in dip switches allow for custom setting of beginning DMX address, all other DMX addresses will follow in sequence. Keep in mind that this decoder should not power more than 5A of lighting and additional power must be provided evenly to large amounts of digital products. If you have any questions about this product please call before ordering.
SKU: LA-EL-DMX-CBL6View Product Page This is a DMX signal Cable with a XLR3 female plug on one end and XLR3 male plug on the other with 36" of lead wire in between. This cable will allow you to connect a DMX controller or device that has XLR3 output plugs to our PX24501 or 24 Channel DMX Drivers, or to daisy chain any other DMX LED Drivers with XLR3 connectors.
DMX Signal Cable, RJ45 to XLR3 Female - 36"
SKU: LA-EL-DMX-CBL1View Product Page This is a DMX signal Cable for an RJ45 type DMX output to an XLR3 Female type DMX input. This cord can be used to connect our U7, Stick 2+, and Stick 3 DMX controllers to any of our DMX drives with an XLR3 DMX input. This cable can also be used to connect an RJ45 output from our PX24500, PX24600, and PX403 drivers to an XLR3 DMX input. Custom cable lengths can be made for special orders, please call for pricing on custom lenghts.