Bright Star 6" Round RGB LED Wall Washer Black Finish - 18W, 24VDC
Product Description Close Description
This is a great new compact color changing LED Wall Washer with six Epistar 3W RGB Three in one built in LED Chips and a sleek black finish. An 18W max output at 24VDC allows this wall washer to produce bright and vivid lighting on walls, buildings, ceiling and signs up to 65ft. This wall washer is able to produce up to 16.7 million shades of amazing color. With a 23° beam angle and indoor or outdoor rating this product is perfect for bars, restaurants, clubs, hotels, stages, historical and modern buildings, museums, art galleries or any other project requiring a compact and extra bright color changing lamp. This light is encased in an IP65 aluminum housing making it fully dust protected and protected against minimal low pressure water jet exposure. Tempered glass and stainless fasteners give this light long lasting outdoor use and the ability to direct the light from 0°-180°. The light can be controlled by RGB or DMX controllers using a 4-pin, 3-loop common anode connection. We recommend no more than three 18 watt wall washers connected in a series using our T-connectors. An attached 70" water-resistant connector cord is included with every light. For easy connection of wall washers, power supplies and controllers, use the many waterproof connectors wire options. Non-submersible. CE and RoHS approved.
SKU: LA-SC-2CONView Product Page
This T or elbow water-resistant connector can be used to connect our RGB wall washers to each other, to a contoller or signal amplifier, or can be used with our waterproof RGB connection wire to pigtails for easy connection with any RGB LED lighting system. 12" long with screw down connection, two males and one female. See the link below for an easy RGB LED connection guide using water-resistant RGB LED connection wires.
SKU: LA-SC-1CONView Product Page
A waterproof connector with 4 conductor 18AWG stranded wire that can be used to connect our RGB wall washers to each other, to a controller or signal amplifier, or for quick and easy connection of any RGB LED product. 80" long with screw down connections, male on one end and a female on the other end. See link below for more ideas on quick and easy RGB LED connections.
Waterproof Mini RGB LED Bluetooth Controller for Smartphones or Tablets, 6-24VDC 4A/CH
SKU: LC-LF-9RGBView Product Page
With this mini Bluetooth device controlling your color changing RGB LED lights from your smart phone or tablet has never been easier (ioS or Android). The IP68 waterproof rated controller can be used with any 6-24VDC constant voltage RGB LED lights. An output of 4 amps x 3 channels allows for 144W of power at 12VDC or 288W at 24VDC. The free and easy to use application lets the user choose from over 16 million color choices and 42 color changing modes with 99 levels of speed adjustment. There are 16 storage spaces to save your favorite custom colors and 16 storage spaces for quick access to your favorite color changing modes. The Bluetooth control range from controller to smartphone or tablet is approximately 100ft with no walls or interference. The small size and simple 18AWG bare connection wires are perfect for any new or existing indoor/outdoor LED lighting application. This product is IP68 waterproof rated but not designed to be submersed in water or directly exposed to any outdoor elements. Please note: Only one Bluetooth Controller can be connected and operated in a single area, multiple Bluetooth Controllers will not pair or sync.
Mean Well Waterproof LED Power Supply 150W - 24VDC
SKU: PS-MW-150-W-24View Product Page
A Mean Well brand Waterproof 150W, 24VDC LED transformer / power supply recommended for use with our 24VDC Wall Washer and Strip Light Products. This product requires an input voltage of 100-240VAC 2.0A or 277VAC .68A; and an output voltage of 24VDC 6.3A maximum. For wet or damp locations. This product is not meant to be directly exposed to outdoor elements. UL recognized, CE approved, IP67 waterproof.