SKU: LC-OL-DMX-D
A small sized DMX Driver which allows you to connect your RGB LED Lights, LED Lighting, LED Ribbon strips or RGB LED Modules to a DMX-512 Lighting controller. Then by the use of PWM and DMX, you can change the color and dimming of your RGB LED lights. For 12VDC systems only. 2A per channel with a maximum power of 72W at 12VDC. For use with 4 pin, 3 loop, common anode style RGB LED and LED Lighting. all wires are bare and need to be connected using a connector or wire nuts. NOTE: To change the DMX address of these modules you need to buy the DMX Editor Controller or have us set the address for each module you buy. Each DMX Driver uses 3 DMX addresses.
SPECIFICATIONS | |
Model | DMX-512 Driver RGB LED |
SKU | LC-OL-DMX-D |
Dimensions | 3.0" X 1.5" X 1.0"T |
Type | 4 Pin, 3 Loop, Common Anode |
Constant Voltage DC Power | 12VDC 2A per Channel Max |
Watts | 72W Max |
Rating | Dry |
Warranty Period | 1 Year |
Test Function | Yes See Mode |
(10) 2 Way Clamp Down Wire Connector
SKU: LA-LU-BC-2P-10 View Product Page
This 2 way clamp down connector is an easy to use single wire connector for mating or extending 16-22AWG wire. This connector can be used for both low and high voltage not exceeding 250V. Use to connect power cords to the input of your LED Transformer as well as LED Lights to the output of your LED Transformer. See thumbnail images for reference. This product is sold in packs of 10 connectors.
(10) 3 Way Clamp Down Wire Connector
SKU: LA-LU-BC-3P-10 View Product Page
This 3 pole clamp down connector is an easy to use 3 wire connector for mating and extending 16-22AWG wire. This connector can be used for both low and high voltage not exceeding 250V. Use to connect a single power cord to 2 LED Transformers or to connect large LED layouts in parallel. See thumbnail images for reference. This product is sold in packs of 10 connectors.
(10) 5 Way Clamp Down Wire Connector
SKU: LA-LU-BC-5P-10 View Product Page
This 5 pole clamp down connector is an easy to use 5 wire connector for mating and extending 16-22AWG wire. This connector can be used for both low and high voltage not exceeding 250V. Use to connect a single power cord to 2 LED Transformers or to connect large LED layouts in parallel. See thumbnail images for reference. This product is sold in packs of 10 connectors.
(10) 1 Wire Solderless Snap Down Butt Connectors, 18-24AWG
SKU: LA-LU-WC-1WB-10 View Product Page
Our solderless single pole snap down butt connectors are designed to easily connect two pieces of 18-24AWG stranded wire together without soldering or wire stripping. Each end of the connector has built in conductive metal blades to perforate and secure your 18-24AWG stranded wire, so no wire strippers are required. Simply insert your wire through the intended wire hole and press down with a pair of pliers. Unlike standard crimping style butt connectors, these connectors can easily be re-used multiple times over. Each connector is rated for a max voltage of 300V AC/DC not to exceed 10 amps. These connectors are sold in sets of 10 and can be used with our T and snap connectors for various wiring circuits.
(10) 1 Wire Solderless Snap Down T Connectors, 18-24AWG
SKU: LA-LU-WC-1WT-10 View Product Page
Our solderless single pole snap down T connectors are designed to easily connect three pieces of 18-24AWG stranded wire together without soldering or wire stripping. Each end of the connector has built in conductive metal blades to perforate and secure your 18-24AWG stranded wire, so no wire strippers are required. Simply insert your wire through the intended wire hole and press down with a pair of pliers. Unlike standard crimping style butt connectors, these connectors can easily be re-used multiple times over. Each connector is rated for a max voltage of 300V AC/DC not to exceed 10 amps. These connectors are sold in sets of 10 and can be used with our butt and snap connectors for various wiring circuits.
Note: * Indicates a required field
- There are currently no reviews for this product