A small sized DMX Driver which allows you to connect your RGB LED Lights, LED Lighting, LED Ribbon strips or RGB LED Modules to a DMX-512 Lighting controller. Then by the use of PWM and DMX, you can change the color and dimming of your RGB LED lights. For 24VDC systems only. 2A per channel with a maximum power of 144W at 24VDC. For use with 4 pin, 3 loop, common anode style RGB LED and LED Lighting. All wires are bare and need to be connected using a connector or wire nuts. NOTE: To change the DMX address of these modules you need to have us set the address for each module you buy (specify addresses when ordering) or you can purchase the DMX Editor Controller, which enables you to change the addresses, of these modules, as often as you like. Each DMX Driver uses 3 DMX addresses.