The PX403 4 channel DMX driver allows you to connect four channels of LED Lighting to DMX512 or DMX1990 Lighting controllers. Use this product to connect your common anode RGB LED lights plus one single color common anode LED light, or four common anode single color LED lights, LED modules, or LED light strips to a DMX512 Control System. For 12 to 24VDC systems only. Includes one 6' Cat5 cable with RJ45 jack connectors. 3A per channel with a maximum power of 144W / 12VDC or 288W / 24VDC. Can be connected to DMX512 signal using RJ45 connectors and Cat5 cables. Unit has DIP switches on the side to manually change the DMX address of each driver. Each PX403 Driver uses 4 DMX addresses. LEDs and power supply are connected using screw down style connectors. RoHs, CE approved.
SKU: LA-EL-DMX-CBLView Product Page
This is a 3 foot long DMX signal Cable for any DMX application requiring XLR3 DMX output to an RJ45 DMX input. This cable will allow you to connect to a DMX controller, that has XLR3 output plugs, and any DMX Driver or controller with RJ45 connector. 36" cable included, XLR3 Male, plug on one end and RJ45 jack on the other end.
Signal Terminator for DMX Driver RJ45 Type
SKU: LA-EL-DMX-TMView Product Page
This is a DMX signal Terminator for use with LED DMX Drivers that use an RJ45 jack. Use the signal terminator on the DMX output of the last DMX Driver in daisy chain. This terminator is needed if you have more than 3 DMX Drivers in a series of daisy chained drivers.