U9 DMX Lighting Controller with Software and 5VDC Power Supply - 256 Channel
Product Description Close Description
The U9 256 Channel DMX Controller uses the Easy Stand Alone (PC) or Easy Stand Alone 2 (PC/MAC) computer software to build and save unique and precise lighting scenes for use away from the computer. Use with our DMX decoders to control up to 85 RGB LED fixtures or 256 single color LED fixtures. Save up to 20 different lighting scenes and play them using the shuffle buttons on the controller. 8 dry contact trigger points can be used with relays to trigger scenes or use the external HE10 connector to trigger up to 255 scenes using binary coding. This system can be run live from the computer via the included software allowing for a full DMX universe of 512 channels. 20k memory allows for 439 steps using 60 channels, and 1184 steps using 20 channels. If you are looking for a powerful and affordable DMX controller or you are just starting out learning about DMX control, this is a great controller for you. The U9 is not limited to only LED control but also can be used for moving heads, fog machines, water jets, fans, or any other DMX compatible device. Software Disk, 5VDC AC/DC converter, and USB to mini USB Cable included.
HE10 Port Connection Cable for U9 & U7 DMX Controllers
SKU: LC-NL-HE10-CBLView Product Page Use this 3" long cable on the external HE10 connector of our U7 and U9 DMX controllers to activate up to 255 scenes using relays and binary coding. To activate a port, a brief contact of at least 1/25
second must be established between the ports (1...8) and the ground (GND). Note: the scene will not be switched off when the switch is released. In your ESA, ESA2 or ESA PRO software set the scene trigger using binary data and up to 255 scene selections.
DMX Signal Cable, XLR3 Male to RJ45 - 36"
SKU: LA-EL-DMX-CBLView Product Page This is a 3 foot long DMX signal Cable for any DMX application requiring XLR3 DMX output to an RJ45 DMX input. This cable will allow you to connect to a DMX controller, that has XLR3 output plugs, and any DMX Driver or controller with RJ45 connector. 36" cable included, XLR3 Male, plug on one end and RJ45 jack on the other end.
PX24500 RGB LED DMX Driver, 12-24VDC 5A/CH
SKU: LC-OL-DMX-PXView Product Page The most popular DMX Driver style PX24500, which allows you to connect your RGB LED Lights, LED Lighting, LED Ribbon strips or RGB LED Modules to DMX512 or DMX1990 Lighting controllers. Then by using PWM & DMX, you can change the color and dimming of your RGB LED lights. For 12 to 24VDC systems only. Includes one 6' Cat5 cable with RJ45 jack connectors. 5A per channel with a maximum power of 180W / 12VDC or 360W / 24VDC. For use with 4 pin, 3 loop, common anode style RGB LED and LED Lighting. Can be connected to DMX512 signal using RJ45 connectors and Cat5 cables. Unit has DIP switches on the side to manually change the DMX address of each driver. Each PX24500 Driver uses 3 DMX addresses. RGB LEDs and power supply are connected using screw down style connectors. RoHs, CE approved.