UL Listed Ribbon Star Extreme is a fully outdoor rated LED Strip Light that can be connected in series up to 100ft (30m). With a TPU coating (Thermoplastic Polyurethane) Ribbon Star Extreme is IP68 outdoor rated, making it waterproof and UV proof (not intended to be submersed for extended periods). Ribbon Star Extreme LED Strip Light provides a perfect light source for any outdoor or underwater lighting projects. The Strip Light can be cut every 6.5 inches and soldered with an end cap and adhesive to provide the best waterproof connection. For those that don't want to solder, there are multiple connection options that can be waterproofed to suite your projects needs. 7 SMD LEDs per 6.5 inches with a total of 126 LEDs per 3m. At .96W per foot, a 118" (3m) roll would require at least a 12W, 24VDC power supply. At the maximum series length of 30m this ribbon would require at least a 150W 24VDC Constant Voltage power supply. This LED strip light is perfect for any outdoor or underwater lighting project. Use with water features, decks, trailers, boats, RV's, dog kennels, landscaping, business trim, pathway lighting, or any other situation that a fully outdoor proof LED Strip Light is needed. Comes with 3M VHB double sided tape as well as 10 mounting clips for a permanent mounting solution. Requires a 24VDC Constant Voltage power source. 3000-3500K Color Temperature. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.
SKU: OA-SC-2CView Product Page This is a 2 conductor outdoor and waterproof stranded wire, made for use with any of our single color indoor or outdoor rated LED lighting products. Use this 18AWG stranded wire with our strip lights, modules, wall washers, or any low voltage DC system. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details. This wire is UL recognized.
TPU End Cap for Single Color Waterproof LED Strips
SKU: RA-SC-RS-ECView Product Page This TPU (Thermoplastic Polyurethane) end cap is made to cap the end of your single color Ribbon Star LED Strip Lights with TPU coating. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip.
TPU End Cap with hole for Single Color Waterproof LED Strips
SKU: RA-SC-RS-ECHView Product Page This TPU (Thermoplastic Polyurethane) end cap with holes is made to cap the end your waterproof strip light while allowing connection wires to pass through. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip wire connections.