UL Listed Ribbon Star Extreme is a fully outdoor rated LED Strip Light that can be connected in series up to 100 feet (30m). With a TPU coating (Thermoplastic Polyurethane) Ribbon Star Extreme is IP68 outdoor rated, making it waterproof and UV proof (not intended to be submersed for extended periods). Ribbon Star Extreme LED Strip Light provides a perfect light source for any outdoor or underwater lighting projects. Comes with one waterproof connector, 10 feet of waterproof lead wire can be soldered to the beginning of your strip at an additional cost. The Strip Light can be cut every 6.5 inches and can be soldered and re-waterproofed using wires and end caps with adhesive. If you prefer not to solder we have multiple connection options that can be waterproofed to suite your projects needs. 7 SMD LEDs per 6.5 inches with a total of 126 LEDs per 3m. At .96W per foot, a 118" roll would require at least a 12W, 24VDC power supply. At the maximum series length of 30m this ribbon would require at least a 150W 24VDC Constant Voltage power supply. This LED strip light is perfect for any outdoor or underwater lighting project. Use with water features, decks, trailers, boats, RV's, dog kennels, landscaping, business trim, pathway lighting, or any other situation that a fully outdoor proof LED Strip Light is needed. Comes with 3M VHB double sided tape and 10 mounting clips for the best long term mounting solution. Requires a 24VDC Constant Voltage power source. 6000-6500K Color Temperature. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.
TPU End Cap for Single Color Waterproof LED Strips
SKU: RA-SC-RS-ECView Product Page This TPU (Thermoplastic Polyurethane) end cap is made to cap the end of your single color Ribbon Star LED Strip Lights with TPU coating. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip.
TPU End Cap with hole for Single Color Waterproof LED Strips
SKU: RA-SC-RS-ECHView Product Page This TPU (Thermoplastic Polyurethane) end cap with holes is made to cap the end your waterproof strip light while allowing connection wires to pass through. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip wire connections.