Ribbon Star Extreme, RGB Outdoor LED Strip Light - UL 24VDC - 118" (3m)
SKU: RL-SC-RSX-RGB-10 View Product Page
UL Listed Ribbon Star Extreme RGB is a fully outdoor rated, color changing, LED Strip Light that can be connected in series up to 100ft (30m). Using 2 positive wires (V+) and 3 negative wires (RGB) this strip can achieve longer serial connections than a standard RGB strip light. Be sure to share your positive wires to your RGB control source for the entire strip to work in unison. With a TPU coating (Thermoplastic Polyurethane) Ribbon Star Extreme RGB is IP68 outdoor rated. Making it fully waterproof, submersible, and UV proof. Ribbon Star Extreme RGB LED Strip Light provides a perfect light source for any outdoor and underwater lighting projects. The Strip Light can be cut every 9.5 inches and has multiple connection options that can be waterproofed to suite your projects needs. 7 SMD LEDs per 9.5 inches with a total of 84 LEDs per 3m. At 1.7W per foot, a 3m roll would require at least a 17W, 24VDC power supply. At the maximum series length of 100ft (30m) this ribbon would require at least a 170W 24VDC Constant Voltage power supply. This LED strip light is perfect for any outdoor or underwater lighting project. Use with water features, decks, trailers, boats, RV's, dog kennels, landscaping, business trim, pathway lighting, pools, or any other situation that a fully outdoor proof LED Strip Light is needed. Comes with 10 mounting clips for a permanent mounting solution. Requires a 24VDC Constant Voltage power source. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.
Ribbon Star Extreme RGB Signal Amplifier, 24VDC 5A/CH
SKU: LC-SC-RSX-RGBA View Product Page
The Ribbon Star Extreme RGB Signal Amplifier is made specifically for use with our Ribbon Star Extreme RGB Outdoor LED Strip Light. If you are installing large amounts of Extreme RGB Strip Light you can use the RGB Extreme Signal Amplifier to extend the RGB control signal once the maximum wattage has been met on the controller. Theoretically you can add an unlimited amount of signal amplifiers in series with your LED Strip lights to add an additional 360W of power per signal amplifier, or 5A per channel. If you are curious how to install a signal amplifier in your RGB LED project see our tutorials page for reference. This product is not intended to be exposed directly to outdoor elements.
(3) Ribbon to Ribbon Connector for Ribbon Star Extreme RGB
This connector is made specifically for use with our Ribbon Star Extreme RGB Outdoor LED Strip Light. Use this connector to easily mate two Extreme RGB LED Strips together. Four screw down allen bolts make for a simple and secure connection. Use a Silicon Glue with special syringe application to make this connector fully water and outdoor proof, as well as fully submersible. See the installation instructions below for reference.
(2) Ribbon wire Ribbon Connector for Ribbon Star Extreme RGB
SKU: RA-SC-RSX-A6-2 View Product Page
This connector is made specifically for use with our Ribbon Star Extreme RGB Outdoor LED Strip Light. With 10" of lead wire between each connector, this can be used to easily mate two Extreme RGB LED Strips together or around a corner. Four screw down allen bolts make for a simple and secure connection. Use an industrial strength Silicon Glue with special syringe application to make this connector fully water and outdoor proof, as well as fully submersible. See the installation instructions below for reference.