Header Logo

Ribbon Star Ultra, Waterproof Warm White LED Strip Light - UL 24VDC - 118" (3m)

Product Description

SKU: RL-SC-RSU24-T-WW-10

UL Listed Ribbon Star, Warm White is an Ultra bright, fully outdoor rated 24VDC waterproof LED Strip Light. With a 24V power rating this Strip Light is the brightest waterproof strip light that we sell. The TPU coating (Thermoplastic Polyurethane) gives Ribbon Star Ultra an IP68 outdoor rating. Making it fully waterproof, submersible, and UV proof. Ribbon Star Ultra LED Strip Light provides a perfect light source for any indoor, outdoor and underwater lighting projects. The Strip Light can be cut every 2 inches and can be connected in series up to 30ft (10m) with no noticeable voltage drop. 6 SMD LEDs per 2 inches with a total of 360 LEDs per 3m. At 5.4W per foot, a 3m roll would require at least a 60W, 24VDC power supply. This LED strip light is perfect for any outdoor or underwater lighting project. Use with water features, decks, trailers, yachts, boats, RV's, dog kennels, landscaping, business trim, pathway lighting, or any other situation that a fully outdoor proof LED Strip Light is needed. Comes with male and female connectors on each end, 3M VHB mounting tape, 10 mounting clips and 4 end caps. Requires a 24VDC Constant Voltage power source. 3500K Color Temperature. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.

Product Downloads
Click For Product Data Sheet
Ultra Waterproof 24V Connection Guide
LED Strip Light Comparison Guide
Click For Electrical Load Calculator
Enter Length: ft 
* 5.4 Watts =
0.00 Watts
Product Specifications
SPECIFICATIONS
ModelRibbon Star Ultra, Waterproof Warm White, 118" (3m)
SKURL-SC-RSU24-T-WW-10
Dimensions118" x 0.52" x 0.28"H
Connection Type2 Wire (+/-)
LED Chip Type3020
LED Quantity6 SMDs per 2 inches
LEDs Per Strip360 SMD LEDs
Input Power24VDC Constant Voltage
Watts5.4W per foot
Beam Angle120°
Lumens260 lm/ft
CRI>80
Kelvin3000-3500K
RatingIP68 Waterproof
Operating Temp-49°~149°F
Max Serial Connection30 Feet
CertificationUL Listed, RoHS, CE
Warranty Period2 Years
Wiring Diagrams
thumb
thumb
thumb

TPU End Cap for Single Color Waterproof LED Strips

SKU: RA-SC-RS-EC     View Product Page
This TPU (Thermoplastic Polyurethane) end cap is made to cap the end of your single color Ribbon Star LED Strip Lights with TPU coating. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip.

TPU End Cap for Single Color Waterproof LED Strips

TPU End Cap with hole for Single Color Waterproof LED Strips

SKU: RA-SC-RS-ECH     View Product Page
This TPU (Thermoplastic Polyurethane) end cap with holes is made to cap the end your waterproof strip light while allowing connection wires to pass through. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip wire connections.

TPU End Cap with hole for Single Color Waterproof LED Strips

(10) Mounting Clips for Ribbon Star Waterproof Strip Lights

SKU: RA-SC-RS-T-CL-10     View Product Page
These are 10 plastic mounting clips made for use with any of our Waterproof TPU coated LED Strip lights. Use these clips for long term mounting of your waterproof LED Strip lights. Two screw holes make for simple installation. Sold in packs of 10 clips. Click the thumbnail image for clip dimensions.

(10) Mounting Clips for Ribbon Star Waterproof Strip Lights

(3) Female Waterproof Ribbon to Wire Strip Light Connectors - 10"

SKU: RA-SC-RS-T-RWF-3     View Product Page
Use this 10" female connector to bare wire on any of our Waterproof Ribbon Star, Ribbon Star Max, Ribbon Star 50/50, or Ribbon Star Ultra LED Strip lights. Can be used to extend and connect your waterproof LED Strip Lights to a power supply or dimmer. Sold in sets of 3 with a waterproof female end.

(3) Female Waterproof Ribbon to Wire Strip Light Connectors - 10"

(3) Male Waterproof Ribbon to Wire Strip Light Connectors - 10"

SKU: RA-SC-RS-T-RWM-3     View Product Page
Use this 10" Male connector to bare wire on any of our Waterproof Ribbon Star, Ribbon Star Max, Ribbon Star 50/50, or Ribbon Star Ultra LED Strip lights. Can be used to extend and connect your waterproof LED Strip Lights to a power supply or dimmer. Sold in sets of 3 with a waterproof male end.

(3) Male Waterproof Ribbon to Wire Strip Light Connectors - 10"

(3) Male/Female Waterproof Ribbon to Ribbon Strip Light Connectors - 20"

SKU: RA-SC-RS-T-RWR-3     View Product Page
Use this 20" wire connector on our Waterproof Ribbon Star, Ribbon Star Max, Ribbon Star 50/50, or Ribbon Star Ultra LED Strips to add 20 inches of lead wire between Waterproof strips. Waterproof Male and Female ends. Sold in sets of 3.

(3) Male/Female Waterproof Ribbon to Ribbon Strip Light Connectors - 20"
RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top