Ribbon Star Ultra, CRI 90+ White LED Strip Light - UL 12VDC

Mean Well Plug-in LED Power Supply 60W - 12VDC

SKU: PS-MW-60-12     View Product Page
A high quality Mean Well brand three prong Wall plug, 60 watt Constant Voltage LED Power Supply which is suitable for dry locations and is capable of supplying power to 54 - 1 watt led modules or lights. Use with any 100-240VAC input for a quick and easy installation of your 12VDC LED Strip Lights, LED Modules, and LED Lights. Comes with short circuit, overload, over voltage and over temperature shut off protection. It has a 5.5mm X 2.1mm Female Plug for the 12V connection. It can be used to connect LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other LED Lighting products. One 5.5 X 2.1mm Male Barrel Jack with screw down terminals included. UL, RoHs and CE approved.

(10) 2 Pole Clamp Down 2 Wire Connector

SKU: LA-LU-BC-2B-10     View Product Page
This 2 pole clamp down connector is an easy to use 2 wire connector for mating or extending 2 pair 12-28AWG wire carrying AC or DC current. This connector can be used for both low and high voltage not exceeding 32A or 250V. Use two connectors for RGB wire connections or one connect to connect DC power, 2 wire AC power cords or to the input of your LED power source as well as LED Lights to the output of your transformer. See thumbnail images for reference. This product is sold in packs of 10 connectors.

(10) 2 Way Clamp Down Wire Connector

SKU: LA-LU-BC-2P-10     View Product Page
This 2 way clamp down connector is an easy to use single wire connector for mating or extending 16-22AWG wire. This connector can be used for both low and high voltage not exceeding 250V. Use to connect power cords to the input of your LED Transformer as well as LED Lights to the output of your LED Transformer. See thumbnail images for reference. This product is sold in packs of 10 connectors.

(5) Ribbon to Ribbon Connector for 10mm Strip Lights

SKU: RA-SC-RSU-RR-5     View Product Page
Use this connector to connect 10mm wide LED light strips from one end to another end. This connection is for the Ribbon Star Long Run 60 LED/m or Dim to Warm light strips. Sold in sets of 5. For use with 0.39" (10mm) wide ribbon products only.

Ribbon to Wire Strip Light Quick Connectors - 10mm 2 Wire

SKU: RA-SC-RSU-RW     View Product Page
Use this connector on our 10mm wide, non-waterproof Ribbon Star Long Run 60 LED/m and Dim to Warm LED Strip Lights. The quick connector to 8 inches of lead wire will allow you to connect your ribbon to a power supply, PWM dimmer, or to other sections of ribbon. Sold in sets of 5, 10, 20, 50, and 100. Purchase larger quantities for a more competitive price. This connector is only meant for use with our 0.39" (10mm) wide two conductor ribbon products and is not guaranteed to work on any strip light products not sold by Ecolocity LED.

(3) Ribbon Wire Ribbon Connector for 10mm Strip Lights

SKU: RA-SC-RSU-RWR-3     View Product Page
Use this connector on Ribbon Star Long Run 60 LED/m or Dim to Warm Strips to connect two strip lights together with 10 inches of lead wire between connection. Can be used to connect around corners or in parallel runs. Sold in sets of 3. For use with 0.39" (10mm) wide ribbon products only.

(3) 2" Ribbon wire Ribbon Connector for 10mm Strip Lights

SKU: RA-SC-RSU-RWRS-3     View Product Page
Use this connector on Ribbon Star Long Run 60 LED/m or Dim to Warm Strips to connect two strips with 2 inches of lead wire between connection. Best used to connect around corners or in tight spaces where a shorter connection wire is needed. Sold in sets of 3. For use with 0.39" (10mm) wide ribbon products only.

2 Conductor DC Connection Wire Red/Black Pair - 22AWG

SKU: LA-SS-DC22     View Product Page
This is a 22 American Wire Gauge DC Connection wire with a Red/Black bonded pair. This connection wire is suitable for connecting LED lighting products using DC electrical Current.

2 Conductor DC Connection Wire Red/Black Pair - 18AWG

SKU: LA-SS-DCW     View Product Page
This is an 18 American Wire Gauge DC Connection wire with a Red/Black bonded pair. This connection wire is suitable for connecting LED lighting products using DC electrical Current.

LED Pro Dim 5 Zone LED and Incandescent Dimmer System, 12-32VDC

SKU: LC-KT-DIM5-KIT     View Product Page
This unique professional quality wireless dimming system can dim LED lighting systems in 5 zones or areas. The RF remote control has 5 selectable channels, each channel can be connected to an unlimited number of Receivers. Each low voltage LED Receiver can connect 10A of 12 - 32VDC LED lighting product. 32 dimming levels from 5-100% brightness gives the user plenty of dimming choices. Each high voltage Triac Receiver can dim your incandescent or high voltage lighting up to 250W at 110VAC or 500W at 220VAC. This allows you to turn off or dim 5 areas or zones of LED and incandescent lights mixed or in different zones. 12VDC - 120W; 24VDC - 240W; 32VDC - 320W Max LED lighting connection to each receiver. Each item is sold separately. You can buy additional receivers as needed for your system. Remote requires on CR2032 Battery, one included.

LED Proximity On/Off Switch with IR Sensor, 12-24VDC 2.5A

SKU: LC-LF-2-SENS     View Product Page
Our mini IR Proximity Switch is a small and effective low voltage on/off switch for 12-24VDC constant voltage LED lighting products. With a 2.5 amp output this switch can control up to 30 watts of 12VDC lighting or 60 watts of 24VDC lighting using bare wire connections. This controller is designed to be powered off when there is any object within 1" of the sensor and powered on when unobstructed. The sensor is conveniently attached to a threaded bolt designed to be permanently installed in any 0.47"-0.50" diameter hole using a 15mm size nut. Designed to be used in a dry environment, ideal applications include cabinet doors, drawers, safes, closets, tool boxes, storage, boats, RV's or any other application requiring illumination when opened or moved. For larger installations use with a single channel signal amplifier to increase the load output.

Flicker Free LED Knob Dimmer, Frequency Adjustable, 12-24VDC 30A

SKU: LC-LF-2DIM     View Product Page
The frequency adjustable LED Light Dimmer uses a knob to dim your 12-24VDC constant voltage LED lighting products from 0-100% and dip switches to change the PWM frequency for flicker free applications. The impressive 30 amp output allows for dimming control of larger circuits without the need of additional accessories, when set to higher PWM frequencies the maximum load decreases. DC input and output wires can easily be secured using the screw down connectors. The small size of this PWM dimmer makes it easy to conceal and set the lights to the brightness level you prefer. Use this dimmer for LED strip lights, LED modules, LED light Ribbon or for dimming pretty much any one color LED product with 12-24VDC constant voltage power requirements.

LED Knob Dimmer One Channel PWM, 12-24VDC 8A

SKU: LC-OL-2DIM     View Product Page
This simple LED Light Dimmer uses a knob to dim your LED lighting products. It requires 12-24VDC input to operate, can handle 1 channel up to 8A or 96W of power at 12VDC, 192W of power at 24VDC. Wires are easily secured with screw down style connections. Can be used to dim LED lights, LED modules, LED light Ribbon or for dimming pretty much any one color LED product with 12-24VDC constant voltage power requirements.

LED Dimmer with IR Sensor, 12-36VDC 8A

SKU: LC-OL-11DIM     View Product Page
This one of a kind PWM Dimmer uses an IR sensor to turn on and off your single channel 12-36VDC constant voltage LED lights at the wave of a hand within an inch or two of the sensor. Hold your hand in front of the IR sensor to dim and brighten your LED lighting. Previous dimming levels are saved once the LED lighting is turned off and will remain at the same brightness once the LED lighting is turned back on. 12-36VDC input and single channel 12-36VDC output with a max of 8A. Each dimmer is capable of dimming 92W at 12VDC, 192W at 24VDC, and 288W at 36VDC. CE and RoHS approved. Click on the link below to view a demonstration video of this product.

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 12V - 60W

SKU: PS-MT-60-12     View Product Page
If you have you been looking for a way to dim your LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Limited power source output allows for class 2 wiring. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 12VDC up to 60w. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation. The transformer requires 50% load if not being used with a dimmer.

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 12V - 150W

SKU: PS-MT-150-12     View Product Page
If you have you been looking for a way to dim your LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 12VDC up to 150w. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation.

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 12V - 200W

SKU: PS-MT-200-12     View Product Page
If you have you been looking for a way to dim your LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 12VDC up to 200w. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation.

Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 12V - 300W

SKU: PS-MT-300-12     View Product Page
If you have you been looking for a way to dim your LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. We have 120VAC input or 277VAC input, 60Hz available. Output 12VDC up to 300w. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation.

Mean Well Plug-in LED Power Supply 40W - 12VDC

SKU: PS-MW-40-12     View Product Page
Our Mean Well brand 12VDC plug-in style, 40 Watt Constant Voltage LED AC/DC Power Transformer can be used in dry locations to output up to 40 Watts or 3.34 Amps of 12VDC power for 12VDC LED lights and controllers. The AC wall input is made through a common 3 prong wall plug cord and the 12VDC output uses a 5.5mm x 2.1mm female plug (5.5mm x 2.1mm male barrel jack included). Built in short-circuit, overload, and over voltage protection guards from damage do to improper installation. Use this LED power supply to connect 12VDC LED Strip Lights, LED Modules, LED Lights, RGB LED lighting and other LED Lighting products. UL listed, RoHs and CE approved.

Mean Well LED Power Supply, 75W - 12VDC

SKU: PS-MW-75-12     View Product Page
A Mean Well 75W 12VDC LED Power Supply / Transformer, with an AC input of 100-240VAC and 12VDC output through one terminal. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload and over voltage protection gaurds the unit from any improper use. It can be used to connect 12VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 12VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 70 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.

Mean Well LED Power Supply Two Output 100W - 12VDC

SKU: PS-MW-100-12     View Product Page
A 100W Mean Well 12VDC LED transformer / power supply, 100-120VAC or 200-240AC input and 12VDC output through two terminals. Built in short circuit, overload, and over voltage protection make this power supply long lasting and dependable. For dry locations only. Has screw down style connections. It can be used to connect LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other LED Lighting products. ULRecognized, RoHs, and CE approved. Can connect up to 90 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.

Mean Well LED Power Supply Three Output 200W - 12VDC

SKU: PS-MW-200-12     View Product Page
A Mean Well 200W 12VDC LED Power Supply / Transformer, with a selectable AC input of either 100-120VAC or 200-240AC and 12VDC output through three terminals. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload, over voltage, and over heating shut down protection guards the unit from any improper use. This power supply can also withstand a 300VAC input surge for up to 5 seconds. It can be used to connect 12VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 12VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 180 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.

Mean Well LED Power Supply CV 350W - 12VDC

SKU: PS-MW-350-12     View Product Page
This Mean Well 350W, 12VDC LED Power Supply / Transformer, has a 115VAC or 230VAC input and 12VDC output through three terminals. For dry locations only. Has screw down style connections. Comes with plastic covering to protect screw down terminals and a cooling fan to prevent high heat during operation. Note: The cooling fan runs noisy and may not be suitable for all applications. It can be used to connect LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other LED Lighting products. UL Recognized and CE approved. Only install face up or in a manner that the cooling vents face upwards with sufficient breathing space.

Mean Well LED Power Supply CV 600W - 12VDC

SKU: PS-MW-600-12     View Product Page
This Mean Well 600W, 12VDC LED Power Supply / Transformer, has a 100 - 240AC input and 12VDC output. For dry locations only. Built in short circuit, overload, over voltage, and overheating protection allows for system shutdown upon any of these circumstances. Forced air cooling by built in DC fan allows for cool operating temperatures. Note: The cooling fan runs noisy and may not be suitable for all applications. Working temperatures are -4°F through 140°F. CN3 port allows for remote control of this power supply. It can be used to connect large amounts of LED Lights, LED Light Ribbons, RGB LED lighting and any other 12VDC Constant Voltage LED Lighting products. UL Recognized and CE approved. Can connect up to 540 watts of 12VDC LED lights. Only install face up with sufficient breathing space.

Mean Well LED Power Supply CV 1000W - 12VDC

SKU: PS-MW-1000-12     View Product Page
This Mean Well 1000W, 12VDC LED Power Supply / Transformer, has a 100 - 240AC input and 12VDC output. For dry locations only. Built in short circuit, overload, over voltage, and overheating protection allows for system shutdown upon any of these circumstances. Forced air cooling by built in DC fan allows for cool operating temperatures. Note: The cooling fan runs noisy and may not be suitable for all applications. Working temperatures are -4°F through 140°F. CN3 port allows for remote control of this power supply. It can be used to connect large amounts of LED Lights, LED Light Ribbons, RGB LED lighting and any other 12VDC Constant Voltage LED Lighting products. UL Recognized and CE approved. Can connect up to 900 watts of 12VDC LED lights. Only install face up with sufficient breathing space.

Mean Well LED Power Supply CV 1500W - 12VDC

SKU: PS-MW-1500-12     View Product Page
This industrial grade Mean Well power converter is intended for 200 - 240VAC 20A 50/60Hz input power only, outputting 125A of 12VDC constant voltage power. Built in short circuit, overload, over voltage, and overheating protection allows for system shutdown upon any of these circumstances. Forced air cooling by built in DC fan allows for cool operating temperatures. Note: The cooling fan runs noisy and may not be suitable for all applications. Working temperatures are -4°F through 140°F, dry locations only. Use this power converter to connect large amounts of 12VDC LED Lights, LED Strips, RGB LED lighting and any other 12VDC Constant Voltage LED Lighting products. UL Recognized and CE approved. We recommend a max load of 90% or connecting no more than 1350 watts of 12VDC LED lights. Only install face up with sufficient breathing space.