Header Logo

GIP Aluminum Extrusion for Curved and Square Covers - 1" Wide

Product Description

SKU: EX-KL3-1

The GIP aluminum profile from KLUS designs is a wider channel designed to create custom linear light fixtures using one or two rows of LED strip lights or our 24 volt double wide LED strips. The GIP channel is designed to be used with our frosted and clear shaped covers only, for a 1" wide low profile extrusion with flat cover the GIZA profile must be used. Numerous mounting choices allow this channel to be installed in a variety of different ways. Using mounting clips you can apply the channel to any surface. Or with the mounting springs these channels can easily be installed directly to ceilings and drywall. All covers are UV resistant and can reach an IP67 waterproof rating using the right waterproof techniques.

Product Downloads
Click For Product Data Sheet
Click for Cover Instruction
mounting instruction
Product Specifications
SPECIFICATIONS
ModelGIP Aluminum Extrusion
SKUEX-KL3-1
Dimensions39.37"L x 1.03"W x 0.29"H
Base Width0.94"
MaterialAluminum
CoverPolycarbonate
MountingScrews, VHB Tape, Mounting Clips, Mounting Springs
Available Lengths1M, 2M
Available FinishesAnodized
Choose Size:
Showing 1 Meter LengthsShow 2 Meter Lengths
1 Meter Lengths are stocked in our inventory, have more discount and ship the same business day.
1M Anodized
1M Anodized
SKU: EX-KL3-1A-1M

$14.99

Choose Cover Type:
Shaped
$14.99
Show 1 Meter LengthsShowing 2 Meter Lengths
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
2M Anodized
2M Anodized
SKU: EX-KL3-1A-2M

$36.99

Choose Cover Type:
Shaped
$36.99

(2) Adjustable Mounting Clip for Most KL3 1" Wide Profiles

SKU: EX-KL3-CLIP-2-2     View Product Page
A set of 2 angle adjustable KLUS brand REGIP mounting brackets compatible with most of our 1" wide Aluminum Channels. Use the two mounting clips to secure the aluminum channels to any drillable surface. The adjustable plastic clips make it so the user can adjust the beam angle of the custom LED lighting fixture. A removable plastic cover allows for quick installation using screws which are then covered to create a clean and finished look. This product is sold in pairs of 2 mounting clips, 2 clips minimum are recommended per 1M of aluminum channel.

(2) Adjustable Mounting Clip for Most KL3 1" Wide Profiles

(2) Extrusion Plastic Mounting Clips for KL3 1" Wide Profiles

SKU: EX-KL3-CLIP-1-2     View Product Page
A set of 2 clips for mounting our 1" wide LED Aluminum Channels. Use the two mounting clips to secure the aluminum channels to any drillable surface. Comes with 2 clips for a secure mounting solution that is simple to install. See a list of compatible extrusions that can be used with these mounting clips below. A minimum of two clips per 1M channel are recommended for a secure installation.

(2) Extrusion Plastic Mounting Clips for KL3 1" Wide Profiles

(2) GP Surface Mounting Spring for, PDS ZM, TRIADA and 1" Extrusions

SKU: EX-KL-CLIP-18-2     View Product Page
This is a set of 2 spring loaded mounting clips for surface mounting our PDS ZM, Triada, and 1" wide extrusions to drywall, wood, granite, brick, or any other solid surface. Works with any 1" wide extrusion without wings. To use, simply drill a 5/16" - 3/8" wide hole into a surface at least 3/8" thick and push the spring through. Comes with 2 clips, one for each end of the profile. For a more secure mount multiple mounting springs may be necessary.

(2) GP Surface Mounting Spring for, PDS ZM, TRIADA and 1" Extrusions

Plastic End Cap for GIP 1" Wide Curved Cover Extrusion

SKU: EX-KL3-CAP-1C     View Product Page
This product is a plastic end cap for our 1" Wide Aluminum Extrusion with Curved Frosted Diffuser to give your extrusion a clean and finished look. This end cap snaps perfectly in to place when the extrusion cover is 0.78" - 0.98" longer than the extrusion (see photo for reference >>). This product is sold individually, extrusions sold separately.

Plastic End Cap for GIP 1" Wide Curved Cover Extrusion

Plastic End Cap for GIP 1" Wide Square Cover Extrusion

SKU: EX-KL3-CAP-1SQ     View Product Page
This product is a plastic end cap for our 1" Wide Aluminum Extrusion with Square Translucent Diffuser to give your extrusion a clean and finished look. This end cap snaps perfectly in to place when the extrusion cover is 0.78" - 0.98" longer than the extrusion (see photo for reference >>). This product is sold individually, extrusions sold separately.

Plastic End Cap for GIP 1" Wide Square Cover Extrusion

90 Degree Connector for Anodized Drywall Extrusions

SKU: EX-KL3-CON-90     View Product Page
The ZM-90 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them at a 90 degree angle. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 90 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our straight 180 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.

90 Degree Connector for Anodized Drywall Extrusions

180 Degree Connector for Anodized Drywall Extrusions

SKU: EX-KL3-CON-180     View Product Page
The ZM-180 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them in a straight line. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 180 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our 90 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.

180 Degree Connector for Anodized Drywall Extrusions
RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top