Header Logo

KOZUS Aluminum Extrusion for 5/8" Drywall Spackle Mount - 1" Wide NEW!

Product Description

SKU: EX-KL3-9

The KOZUS extrusion from KLUS is designed for creating custom LED Strip Light fixtures that mount directly into 5/8" drywall and then spackled over for a clean and modern look. Using an LED strip light with at least 3 LEDs per 1 inch you can create line of light fixtures with no visible hot spots (extra frosted cover only). This aluminum channel is intended to be mounted into drywall slots using gypsum adhesive (GS 20 CECOL) or mounting adhesive. Before installing the extrusion be sure to have your aluminum profile pre-wired with your LED strip light. Wire can be drilled directly through the back of the extrusion or by creating a small hole in the plastic end cap. After the glue dries, cover aluminum wings thinly with a suitable adhesive, put the drywall mesh on, then spackle over the drywall mesh while not affecting the base edge of the profile. Finally, apply paint over the base edge of the extrusion. A variety of cover options including flat and shaped diffusers make for a number of different types of lighting fixtures.

Product Downloads
Click For Product Data Sheet
Click for Cover Instruction
mounting instruction
Product Specifications
SPECIFICATIONS
ModelKOZUS Aluminum Extrusion
SKUEX-KL3-9
Dimensions39.37"L x 2.63"W x 0.96"H
Base Width0.94"
MaterialAluminum
CoverPolycarbonate
MountingGypsum Adhesive and Spackle
Available Lengths1M, 2M
Available FinishesNon-Anodized
Choose Size:
Showing 1 Meter LengthsShow 2 Meter Lengths
1 Meter Lengths are stocked in our inventory, have more discount and ship the same business day.
1M Non-Anodized
1M Non-Anodized
SKU: EX-KL3-9-1M

$29.99

Choose Cover Type:
Flat
Shaped
$29.99
Show 1 Meter LengthsShowing 2 Meter Lengths
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
2M Non-Anodized
2M Non-Anodized
SKU: EX-KL3-9-2M

$74.99

Choose Cover Type:
Flat
Shaped
$74.99

Plastic End Cap for KOZUS 5/8" Wide Drywall Flush Mount Extrusion

SKU: EX-KL3-CAP-9     View Product Page
Use this plastic end cap on our KOZUS extrusion to create a clean and finished look for your LED strip light drywall channel. You can drill a small hole though the bottom of the profile or end cap for the DC power wires. Sold in single sets, finish is light gray in color.

Plastic End Cap for KOZUS 5/8" Wide Drywall Flush Mount Extrusion

90 Degree Connector for Anodized Drywall Extrusions

SKU: EX-KL3-CON-90     View Product Page
The ZM-90 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them at a 90 degree angle. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 90 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our straight 180 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.

90 Degree Connector for Anodized Drywall Extrusions

180 Degree Connector for Anodized Drywall Extrusions

SKU: EX-KL3-CON-180     View Product Page
The ZM-180 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them in a straight line. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 180 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our 90 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.

180 Degree Connector for Anodized Drywall Extrusions
RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top