Header Logo

LOC-30 Aluminum Extrusion 30° Triangle - 1" Wide x 0.2" Deep

Product Description

SKU: EX-KL3-7

The LOC-30 angled extrusion is designed to for mounting to corners under and below cabinets, at the corner of walls, under shelves, store front windows, or any other application wanting a 30 degree beam of light from a right angle. The 30 degree beam is perfect for illumination of counter tops and working surfaces reducing pesky light exposure directly into your eyes. The LOC-30 profile consists of two included pieces: the OPAC-30 profile and the mounting bracket. Each channel is secured to the mounting bracket using 4 included plastic clips, additional clips can be purchased separately. The mounting bracket can be installed using counter sunk screws and then the OPAC-30 profile is then clicke dinto place. Plenty of room on the back side of the channel can be used to conceal your power and control wires. This channel can fit up to 2 rows of 10mm wide led strip lights and has many cover options for custom low energy lighting fixtures.

Product Downloads
Click For Product Data Sheet
Click For Cover Instruction
mounting instruction
Product Specifications
SPECIFICATIONS
ModelLOC-30 Aluminum Extrusion
SKUEX-KL3-7
Dimensions39.37"L x 1.80"W x 1.05"H
Base Width0.94"
MaterialAluminum
CoverPolycarbonate
MountingScrews, Mounting Clips
Available Lengths1M, 2M
Available FinishesAnodized
Choose Size:
Showing 1 Meter LengthsShow 2 Meter Lengths
1 Meter Lengths are stocked in our inventory, have more discount and ship the same business day.
1M Anodized
1M Anodized
SKU: EX-KL3-7A-1M

$39.49

Choose Cover Type:
Flat
Shaped
$39.49
Show 1 Meter LengthsShowing 2 Meter Lengths
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
2M Anodized
2M Anodized
SKU: EX-KL3-7A-2M

$96.99

Choose Cover Type:
Flat
Shaped
$96.99

(2) Left & Right Plastic End Caps for LOC-30 30° Triangle Extrusion

SKU: EX-KL3-CAP-7     View Product Page
This product is a pair of both left and right plastic end caps for our 1" wide 30° Triangle Extrusion, to give your LED installation a clean and finished look. This product is non water-resistant and not meant to be exposed to outdoor elements.

(2) Left & Right Plastic End Caps for LOC-30 30° Triangle Extrusion

(6) Plastic Mounting Clips for Drywall Extrusion

SKU: EX-KL-CLIP-21-6     View Product Page
This is a set of 6 plastic mounting clips for securely adhering 1M of LED extrusion to a flush mount dry wall aluminum housing. Simply slide the plastic mounting clips into the bottom of the extrusion, 6 needed to securely fasten 1M of extrusion, and then click the extrusion into the aluminum flush mount for 0.5" drywall. See installation instructions and compatible extrusion by clicking the links below.

(6) Plastic Mounting Clips for Drywall Extrusion

90 Degree Connector for Anodized Drywall Extrusions

SKU: EX-KL3-CON-90     View Product Page
The ZM-90 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them at a 90 degree angle. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 90 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our straight 180 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.

90 Degree Connector for Anodized Drywall Extrusions

180 Degree Connector for Anodized Drywall Extrusions

SKU: EX-KL3-CON-180     View Product Page
The ZM-180 connector from KLUS slides between the the backside side of two Anodized drywall extrusions to secure them in a straight line. This connector is meant for our Anodized extrusions equipped with small backside mounting grooves: LIPOD, LOKOM, LESTO, LARKO, GIZA, GIP, OPAC, SEKODU, and SEPOD. The 180 degree connectors are attached to the extrusions by sliding them into the grooves and expanding with moderate force using a hex key and included screws. Use these along with our 90 degree connectors to make secure connections between your strip light extrusions and create one of a kind custom light fixtures and designs in walls, ceilings, and hanging type fixtures.

180 Degree Connector for Anodized Drywall Extrusions
RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top