Header Logo

PDS4-K Aluminum Extrusion with Wings - .5" Deep

SKU: EX-KL1-3

Product Description

The KLUS PDS4-K double Anodized Aluminum channel is designed to flush mount 8-10mm wide LED strip lights into wood, drywall, stone, metal, or any other routable material. The extra frosted indoor cover provides a clean line of light when used with a densely spaced SMD LED strip light with at least 3 LEDs per inch. Outdoor Covers can achieve an IP67 rating when sealed properly using a silicon adhesive and are recommended in any outdoor or UV exposed environment. Change the beam angle of the LED Strip to 10° using the focus lens for a more condensed light beam or wall wash.

Product Downloads
Product Specifications
SPECIFICATIONS
ModelPDS4-K Aluminum Extrusion
SKUEX-KL1-3
Dimensions39.37"L x 0.87"W x 0.47"H
Base Width0.44"
MaterialAluminum
CoverPolycarbonate
MountingVHB Tape, Mounting Clips
Available Lengths1M, 2M
Available FinishesAnodized
Choose Size:
Showing 1 Meter Lengths Show 2 Meter Lengths
1 Meter Lengths are stocked in our inventory, have more discount and ship the same business day.
1M Anodized
1M Anodized
SKU: EX-KL1-3A-1M

$13.49

Choose Cover Type:
Indoor
Outdoor
$13.49
Show 1 Meter Lengths Showing 2 Meter Lengths
2 Meter Lengths are drop shipped, have less discount, higher shipping costs and ship within 3-5 business days.
2M Anodized
2M Anodized
SKU: EX-KL1-3A-2M

$32.49

Choose Cover Type:
Indoor
Outdoor
$32.49

Plastic End Cap for PDS4-K .5" Square / Wings Extrusion

SKU: EX-KL1-CAP-3     View Product Page
Our white plastic end caps for our .5" deep PDS4-K square shaped LED Aluminum Extrusions with wings give your extrusion a clean and finished look. This cap will fit both the clear and frosted diffuser styles. This product is sold individually and in single units in order to pair with holed end caps if needed. With proper sealing techniques of your PDS4-K extrusions using an HS outdoor cover these caps can achieve an IP67 water-resistant rating and can be used in outdoor environments.

Plastic End Cap for PDS4-K .5" Square / Wings Extrusion
White Plastic
$2.50
White Plastic w/ Hole
$2.50

IR Sensor Switch for LED Strip Light Channels, 12VDC 3A

SKU: LC-KL-SENS-1     View Product Page
Combine our LED strip lights and aluminum track assortments with this infrared on / off switch to create custom and functional LED light bars. The infrared technology allows you to wave your hand 1-4" from the sensor to turn your lights on and off as well as dimming control. To function properly the IR sensor must be open and exposed with no plastic cover over top. These sensors fit best with our slimmer KL1 style extrusions but can be used with our deeper extrusions by using a small mounting block for a base. You can either purchase the on/off switch or switch plus dimming capability. This 12 volt strip light controller can control up to 3 amps of 12V Strip light or 36 watts. Create your own custom lighting fixtures with simple on off and dimming control by a wave of the hand. Start making custom linear lighting fixtures for your home or business with control at your fingertips. Comes with 3M double sided VHB mounting tape for a permanent bond to your aluminum extrusion.

IR Sensor Switch for LED Strip Light Channels, 12VDC 3A
No Dimming
$15.99
With Dimming
$19.99

Touch Sensor Switch for LED Strip Light Channels, 12VDC 3A

SKU: LC-KL-SENS-2     View Product Page
Combine our LED strip lights and aluminum track assortments with this touch sensor on / off switch to create one of a kind touch activated light bars for any indoor lighting application. The touch spring allows you to touch the cover of your KLUS channel to turn your lights on and off as well as dimming control. This switch needs works best with our slimmer KL1 style extrusions and will need extra base height to work with our KL3 or deeper channels. You can either purchase just the on/off switch or switch plus dimming capability. This 12 volt strip light controller can control up to 3 amps of 12V Strip light or 36 watts. Create your own custom lighting fixtures with simple on off and dimming control with just a touch of the hand. Start making custom linear lighting fixtures for your home or business with control at your fingertips.

Touch Sensor Switch for LED Strip Light Channels, 12VDC 3A
No Dimming
$15.99
With Dimming
$19.99
RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top