Ribbon Star 50/50, White LED Strip Light - UL 12VDC

Ribbon Star Max LED Strip Lights - 120 LEDs per Meter - UL 12VDC - IP20, IP67

SKU: RL-SC-RSM     View Product Page
The UL Listed Ribbon Star Max LED Ribbon is a perfect solution for backlight and ambient light applications. This 118" (3 meters, approximately 10 Feet) ribbon can be cut every one inch and has many quick connection options for easy connection. Ribbon comes with 3M™ 200MP mounting tape on the back, for the best long-term mounting solution. Six (6) SMD LEDs per two inches, 2.92W per foot of power required for this strip of light. Can be used for coves lighting, toe kicks, under cabinet, backlighting, crown molding and many more applications. Requires a 12VDC Constant Voltage power supply. Comes with two quick connectors. UL Listed for class 2 low voltage luminaries and fixtures, RoHS and CE approved.

Ribbon Star Max 2835 CRI 90+ Cool White LED Strip Light, 5300-6000K, ETL 12VDC - IP20

SKU: RL-DX-RSM2-W-3M     View Product Page
Our new high CRI Ribbon Star Max Strip Lights use the latest 2835 type LED chip to provide bright and efficient low energy lighting with a lifespan of 50,000 hours. With a color temperature of 5300-6000K this cool white strip is ideal for working and active environments. You can cut this strip every 0.98" and re-connect by soldering or using our quick connectors, making it easy to conform to any type of under cabinet, toe kick, drop ceiling, display cases or any other indoor accent lighting. The 90+ CRI (color rendering index) output provides clean and vivid lighting for more attraction and color pop on objects or while taking photos, for example the green of a grape will appear more vibrant under a higher CRI light. A high lumen output of 365 lumens per foot, plus the power output of 2.92W per foot means that this strip is highly efficient outputting 125 lumens per watt. Use our strips inside of our aluminum channels with covers to create custom light bars and fixtures. Each strip light requires a 12VDC power source, 29W per 3m roll, and can be dimmed using any of our PWM dimmers or dimmable power supplies. Each roll includes two quick connectors to bare lead wire. This product is ETL listed for class 2 wiring, RoHS and CE approved.

Long Run LED Strip Lights - 140 LEDs per Meter - ETL 24VDC - IP20, IP67

SKU: RL-DX-LR140     View Product Page
The LR140, 10m strip light roll is the brightest and highest output of our Ribbon Star Long Run series tape lights. With 140 LEDs per meter (42 per foot) and a constant current driving IC design, this entire 32.8ft strip can be powered from one end with consistent voltage and brightness from beginning to end. The top mounted 2835 LED chips generate less heat than older 3528 style while outputting high lumens with a longer lifespan. The CRI over 90 spec renders pure illumination of the lighting spectrum, making colors and displays more vibrant and true. A low power output of only 3.66 watts per foot and high lumen output up to 480 lumens per foot make this strip extremely efficient up to 131 lumens per watt. This light strip requires 24VDC power input, can be dimmed using low voltage PWM dimmer or dimmable power supply and can be cut and re-connected every 1.97" (5cm). See our 8mm connector options sold separately below as well as soldering guides for a more permanent connection.

Long Run LED Strip Lights - 70 LEDs per Meter - ETL 24VDC - IP20, IP67

SKU: RL-DX-LR70     View Product Page
The LR70, 15m strip light provides 50 feet of continuous LED lighting with 24V power from one end, forget the hassle of multiple wire runs and splicing small strips together. With the ability to run 50ft in one connection long runs are made much easier with less wiring and less work. An IC constant current design provides consistent illumination with no voltage drop. On board are surface mounted 2835 chips that run cooler, brighter and longer than their 3528 style predecessor. The advantage of CRI over 90 outputs a truer light making colors and displays more vibrant and eye catching. A low power output of only 1.83 watts per foot and standard lumen output up to 239 lumens per foot make this strip extremely efficient and bright enough for most lighting application. This light strip requires 24VDC power input, can be dimmed using low voltage PWM dimmer or dimmable power supply and can be cut and re-connected every 3.94" (10cm). See our 8mm connector options sold separately below as well as soldering guides for a more permanent connection.