Wallwasher Water-Resistant 2 Conductor Connection wire 80"
SKU: LA-SC-3CON View Product Page
This is a waterproof connector with 2 conductor 18AWG wire that can be used to extend the length of the DC connection on our Wall washer power supplies or controllers. 80" long with screw down connections, male on one end and a female on the other end.
2 Wire T Connector for Single Color LED Wall Washers
SKU: LA-SC-5CON View Product Page
This T or elbow waterproof connector can be used to connect our White and Warm White LED Wall Washers to a 24VDC power source, to a dimmer, or can be used with any other 2 wire LED Wall Washer Connector for simple plug and play waterproof connections. These connectors are 16.5" long with screw down connections, two males and one female. See the link below for a layouts using the T connectors with LED Wall Washers or using them as a waterproof connector.
3 Port, 2 Wire T Connector for Single Color LED Wall Washers
SKU: LA-SC-8CON View Product Page
This is an 86" long 3 port T or elbow waterproof connector that can be used to connect up to 4 White or Warm White LED Wall Washers to a 24VDC power source. With 21" of wire between each T connection, this wire allows for a simple parallel connection of multiple LED Wall Washer fixtures. Use with our many other wall washer connectors for quick and easy waterproof wire connections.
Mean Well Waterproof LED Power Supply 240W - 24VDC
SKU: PS-MW-240-W-24 View Product Page
This product is a Mean Well brand waterproof LED power converter with a 100-240VAC, or 277VAC (North America Only) input and a 24VDC 10 amp output of 240W. IP67 rated for wet or damp locations. This LED power supply can be used to power 24VDC Constant Voltage LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and other 24VDC LED Lighting products. Comes with built in PFC (Power Factor Correction) as well as short circuit protection. AC input wire colors are as follow: Brown - Load, Blue - Neutral, Green - Ground. The manufacturer recommends a 92.5% max load of 222 watts. Non-submersible, non uv-proof, UL recognized, RoHS, and CE approved.