Programmable RGB Controller with RF Remote, 12V-24VDC 4A/CH
Product Description Close Description
An amazing RGB LED Controller that is programmable. Easily program one color changing scene using up to 40 steps of fading flashing and dimming with a variety of time and speed adjustments. It has a grey scale LCD screen so you can view and edit in program mode. You can set the hold time for each color, as well as how long the fade time, to the next color. See more
Comes with a mated 6 button RF Remote, which allows you to control the on/off, mode change, speed up/down and brightness up/down for the individual RGB Controller it is paired with. Can be used to control RGB LED Lights, RGB LED Ribbon, RGB LED Modules. This RGB Control is for use with 4 pin 3 loop cable style, common anode RGB Lighting. You need a 12 or 24VDC Constant Voltage Power Supply for this controller. The power supply can be connected with a 5.5mm x 2.1mm barrel plug (one female barrel plug to 12" lead wire connector included). RGB lighting is connected by screw down wire connection. 12 or 24VDC at 4A per channel (3 channels). At 12VDC you can connect 144W of LED Lights; at 24VDC you can connect 288W of LED Lights. FUNCTIONS: 7 static colors, 7 color fading change, 7 color jumpy change (instant change to next color) and one DIY programmable scene using up to 40 steps. Remote control uses one(1) 12V/23A type battery, which is included. Hide
SKU: LC-OL-1RGBAView Product Page
This RGB LED Signal Amplifier is used to add more RGB LED modules, RGB LED Ribbon or RGB LED Lights to your existing RGB LED controller and will allow the additional lights to perform the same color changes as the RGB lights that are connected to the main controller. By adding this RGB Amplifier and another power supply you can add up to 144W of 12VDC or 288W of 24VDC RGB Lighting to your existing RGB lights. For Constant Voltage 12-24VDC system only, 4A per channel of power maximum thru this amplifier. For use with 4 pin, 3 loop, common anode style RGB Lighting. Input power can be connected by 5.5mm x 2.1mm barrel plug or screw down terminals. The RGB signal wires are connected by screw down type connector.