Our color changing 24VDC Ribbon Star Flex RGB LED Strip Light incorporates a sophisticated PCB design that allows the strip light to be bent, twisted, and curved on a horizontal axis without damaging the electrical circuit. Unlike traditional RGB strip lights which only bend like you see when rolled up on a reel, this strip can be manipulated to create custom shapes, designs, lettering, and adhere to irregular layouts. With cuttable sections every 3.97" this color changing tape light can be cut and reconnected to any length, an 11" wire lead is factory soldered to the beginning of each roll. Please note: This strip must be soldered using 4 conductor stranded wire to cut and re-connect. With use of a common anode 24VDC color controller this strip light can be dimmed, brightened, and output over 16 million color variations (255 levels of Red, Green, and Blue). Requiring 3.3 watts of 24VDC constant voltage power per foot of strip, an entire 3 meter roll would require at least 33 watts of 24V power to operate. With (6) 3528 type surface mount LED chips every 3.97" and 94.5 lumens per foot this strip will output a bright even glow of color changing, low power, and eco friendly lighting for years to come.
|Click For Product Data Sheet|
|RGB Strip Light Soldering Guide|
|LED Strip Light Comparison Guide|
|Click For Electrical Load Calculator|
|Model||Ribbon Star Flex, RGB 118" (3m)|
|Dimensions||118"L x 0.32"W x 0.07"H|
|Connection Type||4 Wire RGB(+)|
|LED Chip Type||3528|
|LED Quantity||6 SMDs per 3.94 inches|
|LEDs Per Strip||180 SMD LEDs|
|Input Power||24VDC Constant Voltage|
|Watts||3.30W per foot|
|IP Rating||IP20 Indoor|
|Max Serial Connection||30 Feet|
|Product Lifetime||50,000 Hours|
|Warranty Period||2 Years|
For B2B or Large Quantity Price Info Click Here
Pro RGB LED Controller with RF Remote, 5-24VDC 6A/CH
SKU: LC-OL-5RGBC-WR View Product Page
Our Pro RGB LED Controller with 28 button RF Remote has many functions including custom color selection and DIY color effects for your RGB LED lighting control. On the top of the controller is a 16 button control pad and RGB indicator lights. Input power can be 5VDC, 12VDC or 24VDC (auto switching). Max power thru this controller is 6A x 3 channels, or 90W - 5VDC, 216W - 12VDC, 432W - 24VDC. It can be used to control our Ribbon Star RGB LED strip lights, RGB LED Modules or any 5-24VDC constant voltage RGB LED Lighting. This controller is designed for use with 4 pin, 3 loop, common anode style RGB products only. RGB and input connections are screw down type. The Pro RGB offers 5 storage buttons to record your favorite effects and settings. With 16 brightness level adjustments on Red, Green and Blue you can create 4,096 possible static colors, with seven storage buttons for your favorite colors. There are 29 built in modes with speed and brightness adjustments or create your own color effects with your seven static color choices. See the link in the specification chart below for a list of the 29 pre-programmed color modes. Each RF Remote control requires (1) CR2025 type battery, one is included.
Mean Well Plug-in LED Power Supply 60W - 12VDC
SKU: PS-MW-60-12 View Product Page
A high quality Mean Well brand three prong Wall plug, 60 watt Constant Voltage LED Power Supply which is suitable for dry locations and is capable of supplying power to 54 - 1 watt led modules or lights. Use with any 100-240VAC input for a quick and easy installation of your 12VDC LED Strip Lights, LED Modules, and LED Lights. Comes with short circuit, overload, over voltage and over temperature shut off protection. It has a 5.5mm X 2.1mm Female Plug for the 12V connection. It can be used to connect LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other LED Lighting products. One 5.5 X 2.1mm Male Barrel Jack with screw down terminals included. UL, RoHs and CE approved.