This RGB LED Signal Amplifier is used to add more RGB LED modules, RGB LED Ribbon or RGB LED Lights to your existing RGB LED controller and will allow the additional lights to perform the same color changes as the RGB lights that are connected to the main controller. By adding this RGB Amplifier and another power supply you can add up to 144W of 12VDC or 288W of 24VDC RGB Lighting to your existing RGB lights. For Constant Voltage 12-24VDC system only, 4A per channel of power maximum thru this amplifier. For use with 4 pin, 3 loop, common anode style RGB Lighting. Input power can be connected by 5.5mm x 2.1mm barrel plug or screw down terminals. The RGB signal wires are connected by screw down type connector.
3 in 1 Wifi LED Network Controller and Dimmer for Smartphones or Tablets, 12-24VDC 4A/CH
SKU: LC-LT-RGB3-WIFIView Product Page
The WiFi-103 LED Controller uses the same cutting edge technology as our WiFi-102 LED Controller but also allows the user to use the controller over an existing home or business network. Use the WiFi-103 to control your RGB, two tone, or single color LED lights using any iOS or Android smart phone or tablet. One WiFi controller can be used as an RGB Controller, a Color Temperature Adjustable Controller, or a Single Color Dimmer. With a variety of built in modes, DIY functions, color wheel choices, as well as specific 0-255 brightness settings, this controller is as versatile as it gets. With output ratings of 4A x 3 channels this controller can handle up to 144W of RGB LED Lights, 96W of dual tone LEDs, or 144W of single color LED Lights. Each controller can be paired with an unlimited amount of WiFi-103 receivers using 2.4GHz Wi-Fi, 802.11b/g/n Protocol. At 6A x 3 channels each wireless receiver can handle 216W at 12VDC or 432W at 24VDC, with a 150ft RF signal radius (line of sight). Adjustable SSID settings allow for 16 different WiFi controllers to be operated as their own WiFi device in one space, see the instruction manual below for all of the great features of this product including saving and building custom scenes. CE and RoHS approved.
Mean Well LED Power Supply Three Output 200W - 12VDC
SKU: PS-MW-200-12View Product Page
A Mean Well 200W 12VDC LED Power Supply / Transformer, with a selectable AC input of either 100-120VAC or 200-240AC and 12VDC output through three terminals. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload, over voltage, and over heating shut down protection guards the unit from any improper use. This power supply can also withstand a 300VAC input surge for up to 5 seconds. It can be used to connect 12VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 12VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 180 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.