Header Logo

Wall Mount 4 Zone Wireless RGBW LED Controller with DMX Output NEW!

Product Description

SKU: LC-LT-RGBW-UX8

Our state of the art UX8 RGBW wall mounted controller uses cutting edge technology to create customized wireless RGBW LED lighting control for your indoor lighting needs. Compatible 2.4GHz RF wireless RGBW receivers are designed to pair to the wall mount controller. Pair an unlimited amount of wireless receivers to 4 zones within the RF signal radius of 150ft (line of sight). The wall mounted unit allows you to control each zone independently or together in the groups of your choosing. With the addition of a Wifi-104 controller you can pair your wall mounted unit to your home or business WiFi network and then take control of your 4 zones and create custom DIY lighting scenes using a free smart phone application. Please note that the WiFi-104 light output is not controllable through the RGBW wall mount controller, you must use RF wireless receivers to successfully control your lights from both your phone and wall mount panel. With the addition of a DMX signal output there is also the option of using 4 Channel DMX decoders or fixtures to control your 4 lighting zones, simply set your DMX fixture to the proper address for unlimited control over 4 zones. Zone 1 = DMX address 1, Zone 2 = DMX address 5, Zone 3 = DMX address 9, and Zone 4 = DMX address 14. There are a variety of ways you can use this controller so be sure to observe the maximum load ratings of the receiver of decoder that you are using to power your low voltage RGBW LED lights. For connection examples click the wiring tab in the specification box below. One 5VDC transformer is included with each controller for powering the unit.

Product Downloads
Product Specifications
SPECIFICATIONS
ModelRGBW Wall Mount Controller
SKULC-LT-RGBW-UX8
Dimensions5.20"L x 7.10"W x 1.40"H
Input Connection2 Wire (+/-)
Output Connection3 Wire DMX(+)
2.4GHz Wireless RF
Input Power5VDC
Control ModeRGBW, 4 Zones
RatingIndoor
Operating Temp-22° ~ 131°F
Warranty Period1 Year
Previous Mode on Power CycleYes
Static Color Choices16 Million
Color Changing Modes12 Pre-programmed
5 DIY Modes with Wifi-104
Wiring Diagrams
thumb
thumb
thumb
thumb

Receiver for WiFi-104 Controller, 5-24VDC 5A/CH

SKU: LC-LT-RGBW-RC
This product is a wireless zone receiver that can be paired to our WiFi-104 4 in 1 LED controller for control over 12 zones. Use this receiver to control 1, 2, 3 or 4 color constant voltage LEDs with 12 individually controllable zones. With 5A x 4CH max output this receiver can control an additional 240W of constant voltage LEDs at 12VDC or 480W at 24VDC, with a 150ft RF signal radius. This product is RoHS and CE approved.

Receiver for WiFi-104 Controller, 5-24VDC 5A/CH

PX403 4 Channel LED DMX Driver, 12-24VDC 3A/CH

SKU: LC-OL-DMX-PX02     View Product Page
The PX403 4 channel DMX driver allows you to connect four channels of LED Lighting to DMX512 or DMX1990 Lighting controllers. Use this product to connect your common anode RGB LED lights plus one single color common anode LED light, or four common anode single color LED lights, LED modules, or LED light strips to a DMX512 Control System. For 12 to 24VDC systems only. Includes one 6' Cat5 cable with RJ45 jack connectors. 3A per channel with a maximum power of 144W / 12VDC or 288W / 24VDC. Can be connected to DMX512 signal using RJ45 connectors and Cat5 cables. Unit has DIP switches on the side to manually change the DMX address of each driver. Each PX403 Driver uses 4 DMX addresses. LEDs and power supply are connected using screw down style connectors. RoHs, CE approved.

PX403 4 Channel LED DMX Driver, 12-24VDC 3A/CH

4 in 1 Wifi LED Network Controller and Dimmer for Smartphones or Tablets, 12-24VDC 4A/CH

SKU: LC-LT-RGBW-WIFI     View Product Page
The WiFi-104 is the latest of our Wifi LED Controllers, allowing the user to control RGB+W, RGB, two tone, and Single Color LED Strip Light all from your smart phone or tablet. With this controller you do not have to switch from your home network to get back on the internet, but it still can be used remotely as it's own WiFi source. Each WiFi-104 can control up to 12 zones separately with unlimited receivers per zone using 2.4GHz Wi-Fi, 802.11b/g/n Protocol. This means you can control any type of 5-24VDC in twelve places throughout your WiFi area. 12 built in modes including DIY functionality, color wheel choices, as well as specific 0-255 brightness settings, this controller is one of the most versatile we've seen. Output ratings of 4A x 4 channels allow this controller can handle up to 48W per channel at 12VDC or 96W per channel at 24VDC. Each additional wireless zone receiver can handle 5A x 4 channels or 60W per channel and 240W when all channels are being used, with a 150ft RF signal radius (line of sight). Adjustable SSID settings allow for 16 different WiFi controllers to be operated as their own WiFi device in one space, see the instruction manual below for all of the great features of this product including saving and building custom scenes and pairing the wireless 12 zone receivers. This product is CE and RoHS approved.

4 in 1 Wifi LED Network Controller and Dimmer for Smartphones or Tablets, 12-24VDC 4A/CH
WiFi-104 & Remote
$155.99
WiFi-104 Receiver
$64.99
RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top