Header Logo

Ribbon Star Ultra, Waterproof Warm White LED Strip Light - UL 12VDC - 118" (3m)

Product Description

SKU: RL-SC-RSU-T-WW-10

The UL Listed Ribbon Star Ultra, Warm White flexible waterproof LED Strip Light is fully enclosed in a TPU coating (Thermoplastic Polyurethane), for an IP68 rating, making this LED Strip fully water and UV proof. This 118" (3m) ribbon has a male water-resistant connector on one end and a female connector on the other end for easy connection. Comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. 3 SMD LEDs per inch and 54 Watts are required for this 118" strip. This LED Ribbon strip is extremely bright, so bright it can directly replace T-8, T-10 and T-12 Fluorescent bulbs in light boxes, monument signs and can signs. It can also be used for overhead lighting, house eves, under stairs, outdoor lighting and any other application requiring an ultra bright and fully weather-proof LED Strip Light. Comes with 10 clear plastic screw down holders, 4 closed end caps, 4 end caps with holes for wiring, and a waterproof connector at each end. We recommended that you mount this strip to steel or aluminum, for a good heat sink. This product requires a 12VDC Constant Voltage power source. 3000-3500K color temperature. UL Listed for class2 luminaries and fixtures, RoHS and CE approved.

Product Downloads
Click For Product Data Sheet
Ultra Waterproof 12V Connection Guide
LED Strip Light Comparison Guide
Click For Electrical Load Calculator
Enter Length: ft 
* 5.4 Watts =
0.00 Watts
Product Specifications
SPECIFICATIONS
ModelRibbon Star Ultra, Waterproof Warm White - 118" (3m)
SKURL-SC-RSU-T-WW-10
Dimensions118" x 0.52" x 0.28"H
Connection Type2 Wire (+/-)
LED Chip Type3020
LED Quantity3 SMDs per inch
LEDs Per Strip360 SMD LEDs
Input Power12VDC Constant Voltage
Watts5.4W per foot
Beam Angle120°
Lumens260 lm/ft
CRI>80
Kelvin3000-3500K
RatingIP68 Waterproof
Operating Temp-49°~149°F
Max Serial Connection15 Feet
CertificationUL Listed, RoHS, CE
Warranty Period2 Years
Wiring Diagrams
thumb
thumb
thumb

TPU End Cap for Single Color Waterproof LED Strips

SKU: RA-SC-RS-EC     View Product Page
This TPU (Thermoplastic Polyurethane) end cap is made to cap the end of your single color Ribbon Star LED Strip Lights with TPU coating. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip.

TPU End Cap for Single Color Waterproof LED Strips

TPU End Cap with hole for Single Color Waterproof LED Strips

SKU: RA-SC-RS-ECH     View Product Page
This TPU (Thermoplastic Polyurethane) end cap with holes is made to cap the end your waterproof strip light while allowing connection wires to pass through. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip wire connections.

TPU End Cap with hole for Single Color Waterproof LED Strips
Out of Stock

(10) Mounting Clips for Ribbon Star Waterproof Strip Lights

SKU: RA-SC-RS-T-CL-10     View Product Page
These are 10 plastic mounting clips made for use with any of our Waterproof TPU coated LED Strip lights. Use these clips for long term mounting of your waterproof LED Strip lights. Two screw holes make for simple installation. Sold in packs of 10 clips. Click the thumbnail image for clip dimensions.

(10) Mounting Clips for Ribbon Star Waterproof Strip Lights

(3) Female Waterproof Ribbon to Wire Strip Light Connectors - 10"

SKU: RA-SC-RS-T-RWF-3     View Product Page
Use this 10" female connector to bare wire on any of our Waterproof Ribbon Star, Ribbon Star Max, Ribbon Star 50/50, or Ribbon Star Ultra LED Strip lights. Can be used to extend and connect your waterproof LED Strip Lights to a power supply or dimmer. Sold in sets of 3 with a waterproof female end.

(3) Female Waterproof Ribbon to Wire Strip Light Connectors - 10"

(3) Male Waterproof Ribbon to Wire Strip Light Connectors - 10"

SKU: RA-SC-RS-T-RWM-3     View Product Page
Use this 10" Male connector to bare wire on any of our Waterproof Ribbon Star, Ribbon Star Max, Ribbon Star 50/50, or Ribbon Star Ultra LED Strip lights. Can be used to extend and connect your waterproof LED Strip Lights to a power supply or dimmer. Sold in sets of 3 with a waterproof male end.

(3) Male Waterproof Ribbon to Wire Strip Light Connectors - 10"

(3) Male/Female Waterproof Ribbon to Ribbon Strip Light Connectors - 20"

SKU: RA-SC-RS-T-RWR-3     View Product Page
Use this 20" wire connector on our Waterproof Ribbon Star, Ribbon Star Max, Ribbon Star 50/50, or Ribbon Star Ultra LED Strips to add 20 inches of lead wire between Waterproof strips. Waterproof Male and Female ends. Sold in sets of 3.

(3) Male/Female Waterproof Ribbon to Ribbon Strip Light Connectors - 20"
Out of Stock
RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top