The Flexible Ribbon Star Supreme Warm White LED Ribbon is the brightest 12V LED Strip Light on the market. This UL Listed 118" (3m) LED ribbon can be cut every 0.58" and must be soldered to re-connect. Comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 3 high output 3014 SMD LEDs per 0.58" for a total of 612 LEDs per 118" LED strip. This LED Ribbon strip is extremely bright, so bright it can directly replace T-8 and T-12 Fluorescent bulbs in light boxes, and signs. It can also be used for overhead lighting, cove, under cabinet, back lighting and many more applications. We recommended that you mount this strip to steel or aluminum, for a good heat sink. Requires a 100W 12VDC Constant Voltage power source per 118" strip. 3500K Color Temperature, UL Listed for class2 luminaries and fixtures, RoHS and CE approved.
Mean Well LED Power Supply Two Output 100W - 12VDC
SKU: PS-MW-100-12View Product Page A 100W Mean Well 12VDC LED transformer / power supply, 100-120VAC or 200-240AC input and 12VDC output through two terminals. Built in short circuit, overload, and over voltage protection make this power supply long lasting and dependable. For dry locations only. Has screw down style connections. It can be used to connect LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other LED Lighting products. ULRecognized, RoHs, and CE approved. Can connect up to 90 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.
LED Dimmer with Key Fob RF Remote, 12-24V 30A
SKU: LC-LF-1DIMView Product Page Our small sized LED dimmer uses a uniquely paired key fob RF remote to dim and control your 12-24VDC constant voltage LED lights. The impressive 30 amp output allows for dimming control of larger circuits without the need of additional accessories. DC input and output wires can easily be secured using the screw down connectors. Dim up to 360 watts of lighting using 12 Volt products or 720 watts using 24 Volt products. Choose from 5-100% range of dimming levels using two simple arrow buttons on the remote. Our key fob led dimmer can be used to dim LED strip lights, LED modules, LED wall washers, or for dimming any one color common anode 12VDC or 24VDC LED products. Each RF Remote requires (2) 3V / CR2016 type batteries (included) and is paired with a unique RF frequency to prevent command crossover when using multiple units.
LED Knob Dimmer One Channel PWM, 12-24VDC 8A
SKU: LC-OL-2DIMView Product Page This simple LED Light Dimmer uses a knob to dim your LED lighting products. It requires 12-24VDC input to operate, can handle 1 channel up to 8A or 96W of power at 12VDC, 192W of power at 24VDC. Wires are easily secured with screw down style connections. Can be used to dim LED lights, LED modules, LED light Ribbon or for dimming pretty much any one color LED product with 12-24VDC constant voltage power requirements.