Header Logo

Ribbon Star ThinLux, Warm White LED Strip Light - ETL 24VDC NEW!

Product Description

SKU: RL-DX-TL-WW-10

Our 24VDC Ribbon Star ThinLux Warm White LED Strip Light measures only 3.5mm wide (0.14") and outputs an astonishing 549 lumens per foot. The thin and low profile makes this strip light easy to hide for projects with limited mounting space, ideal for for furniture designers, cabinet makers, costume designers, stage designers, sculptors and architectural designers. The ThinLux LED Strip requires 24VDC constant voltage power and consumes 7.32W of power per foot to operate. All of our Ribbon Star strips can be dimmed by a compatible low voltage DC PWM type dimmer or by a LVM dimmable power supply. With cut lines every 1.97" you can easily cut and reconnect custom lighting lengths by soldering wires to the copper pads between the cut marks. 3M double sided adhesive on the back of the strip light provides a permanent mounting solution to any clean, dry surface. Please note this strip light does not have any quick connectors available and must be soldered to cut and connect. Visit our soldering tutorial if you need some pointers on the best strip light soldering techniques. This LED strip light is ETL listed, RoHS and CE approved. Note: This product runs warm and is recommended to be installed on a metal surface or heat sink. For lifetime longevity of light output, the daily operation should not exceed 12 hours.

Product Downloads
Click For Product Data Sheet
ThinLux Connection Guide
LED Strip Light Comparison Guide
Click For Strip Light Soldering Video
Click For Electrical Load Calculator
Enter Length: ft 
* 7.23 Watts =
0.00 Watts
Product Specifications
SPECIFICATIONS
ModelRibbon Star ThinLux, Warm White 24VDC
SKURL-DX-TL-WW-10
Dimensions 118"L x 0.14"W x 0.04"H
Connection Type2 Wire (+/-)
LED Chip Type2016
LED Quanity6 LEDs per 1.97"
LEDs Per Strip360 SMD LEDs
Input Power24VDC Constant Voltage
Watts7.32W per foot
Beam Angle120°
Lumens549 lm/ft
CRI>80
Kelvin2700-3500K
RatingIP20 Indoor
Operating Temp-4°~113°F
Max Serial Connection20 Feet
Product Lifetime30,000 Hours
CertificationETL Listed, RoHS, CE
Warranty Period2 Years
Wiring Diagrams
Thumb
Thumb
Thumb
ThinLux Dimensions Ribbon Star ThinLux Light Meter
19.5" (0.5m) Sample
$14.99
118" (3m) Roll
$79.99
Buy
Discount
You Pay
6+
5% off
$76.00
13+
8% off
$73.60
31+
12% off
$70.40
61+
15% off
$68.00
100+
18% off
$65.60

For B2B or Large Quantity Price Info Click Here

Mean Well LED Power Supply, 75W - 24VDC

SKU: PS-MW-75-24     View Product Page
A Mean Well 75W 24VDC LED Power Supply / Transformer, with an AC input of 100-240VAC and 24VDC output through one terminal. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload and over voltage protection gaurds the unit from any improper use. It can be used to connect 24VDC LED Wall Washers, LED Lights, LED Strips, RGB LED lighting and other 24VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 70 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.

Mean Well LED Power Supply, 75W - 24VDC

Waterproof Mini LED Dimmer With RF Remote & 8 Modes, 5-24VDC 12A

SKU: LC-LF-23DIM     View Product Page
Our IP68 rated Waterproof Mini LED Dimmer with RF Remote is an amazing 5-24VDC LED dimmer that provides smooth LED dimming from 5-100% as well as 8 built in flashing and strobe modes with speed adjustment. Don't let the small size fool you this controller boasts 12A of maximum output power or 60W at 5VDC, 144W at 12VDC, and 288W at 24VDC. The bare wire leads make connecting your dimmer simple for any indoor or outdoor 5-24VDC Constant Voltage installation. The RF remote has a number of pre-set dimming levels for quick and easy dimming. Dimming levels or current mode will be remembered when 5-24VDC is turned off and back on. An IP68 rating makes this product waterproof for any outdoor LED project but is not designed to be submersed or directly exposed to outdoor elements. Each RF remote includes one 3V CR2025 battery for operation.

Waterproof Mini LED Dimmer With RF Remote & 8 Modes, 5-24VDC 12A

2 Conductor DC Connection Wire Red/Black Pair - 22AWG

SKU: LA-SS-DC22     View Product Page
This is a 22 American Wire Guage DC Connection wire with a Red/Black bonded pair. This connection wire is suitable for connecting LED lighting products using DC electrical Current. This wire is UL recognized for use with UL components.

2 Conductor DC Connection Wire Red/Black Pair - 22AWG

RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top