Header Logo

Ribbon Star ThinLux, White LED Strip Light - ETL 24VDC NEW!

Product Description

SKU: RL-DX-TL-W-10

Our 24VDC Ribbon Star ThinLux White LED Strip Light measures only 3.5mm wide (0.14") and outputs an astonishing 670 lumens per foot. The thin and low profile makes this strip light easy to hide for projects with limited mounting space, ideal for for furniture designers, cabinet makers, costume designers, stage designers, sculptors and architectural designers. The ThinLux LED Strip requires 24VDC constant voltage power and consumes 7.32W of power per foot to operate. All of our Ribbon Star strips can be dimmed by a compatible low voltage DC PWM type dimmer or by a LVM dimmable power supply. With cut lines every 1.97" you can easily cut and reconnect custom lighting lengths by soldering wires to the copper pads between the cut marks. 3M double sided adhesive on the back of the strip light provides a permanent mounting solution to any clean, dry surface. Please note this strip light does not have any quick connectors available and must be soldered to cut and connect. Visit our soldering tutorial if you need some pointers on the best strip light soldering techniques. This LED strip light is ETL listed, RoHS and CE approved. Note: This product runs warm and is recommended to be installed on a metal surface or heat sink. For lifetime longevity of light output, the daily operation should not exceed 12 hours.

Product Downloads
Click For Product Data Sheet
ThinLux Connection Guide
LED Strip Light Comparison Guide
Click For Strip Light Soldering Video
Click For Electrical Load Calculator
Enter Length: ft 
* 7.23 Watts =
0.00 Watts
Product Specifications
SPECIFICATIONS
ModelRibbon Star ThinLux, White 24VDC
SKURL-DX-TL-W-10
Dimensions 118"L x 0.14"W x 0.04"H
Connection Type2 Wire (+/-)
LED Chip Type2016
LED Quanity6 LEDs per 1.97"
LEDs Per Strip360 SMD LEDs
Input Power24VDC Constant Voltage
Watts7.32W per foot
Beam Angle120°
Lumens670 lm/ft
CRI>80
Kelvin5700-6500K
RatingIP20 Indoor
Operating Temp-4°~113°F
Max Serial Connection20 Feet
Product Lifetime30,000 Hours
CertificationETL Listed, RoHS, CE
Warranty Period2 Years
Wiring Diagrams
Thumb
Thumb
Thumb
ThinLux Dimensions Ribbon Star ThinLux Light Meter
19.5" (0.5m) Sample
$14.99
118" (3m) Roll
$79.99
Buy
Discount
You Pay
6+
5% off
$76.00
13+
8% off
$73.60
31+
12% off
$70.40
61+
15% off
$68.00
100+
18% off
$65.60

For B2B or Large Quantity Price Info Click Here

Mean Well LED Power Supply Three Output 200W - 24VDC

SKU: PS-MW-200-24     View Product Page
A Mean Well 200W 24VDC LED Power Supply / Transformer, with a selectable AC input of either 100-120VAC or 200-240AC and 24VDC output through three terminals. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload, over voltage, and over heating shut down protection guards the unit from any improper use. This power supply can also withstand a 300VAC input surge for up to 5 seconds. It can be used to connect 24VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 24VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 180 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.

Mean Well LED Power Supply Three Output 200W - 24VDC

LED Knob Dimmer One Channel PWM, 12-24VDC 8A

SKU: LC-OL-2DIM     View Product Page
This simple LED Light Dimmer uses a knob to dim your LED lighting products. It requires 12-24VDC input to operate, can handle 1 channel up to 8A or 96W of power at 12VDC, 192W of power at 24VDC. Wires are easily secured with screw down style connections. Can be used to dim LED lights, LED modules, LED light Ribbon or for dimming pretty much any one color LED product with 12-24VDC constant voltage power requirements.

LED Knob Dimmer One Channel PWM, 12-24VDC 8A

2 Conductor DC Connection Wire Red/Black Pair - 22AWG

SKU: LA-SS-DC22     View Product Page
This is a 22 American Wire Guage DC Connection wire with a Red/Black bonded pair. This connection wire is suitable for connecting LED lighting products using DC electrical Current. This wire is UL recognized for use with UL components.

2 Conductor DC Connection Wire Red/Black Pair - 22AWG

RELATED PRODUCTS
FREE SHIPPING OVER $200
Orders Shipped within Continental United States
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER
My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information

If you forgot your password please Click Here.

Click Here to register a new B2B account.

Top