FREE SHIPPING
For Orders Over $200
Orders Shipped within Continental USA

CATEGORIES

LED INFORMATION

Water-Resistant RGB Connection wire Female to Pigtail 30"

SKU: LA-SC-6CON
A 4 wire waterproof connector that can be used to connect our RGB wall washers to each other, to a controller, signal amplifier, or any other RGB products for a quick and easy connection. 30" long with screw down connections, female on one end with a pigtail 4 wire connection on the other. See the connection guide link below for ideas on easy RGB LED connection.



Email A Friend
Bookmark This Page Printable Page Printable Page
Printable Page
   - Click the arrow or text to reveal answers.
  - Customer service representatives.
  - Verified purchasers of this product.
For B2B or Large Quantity Price Info Click Here
Bright Star 8" Round RGB LED Wall Washer - 36W, 24VDC

SKU - WW-SC-RGB1     View Product Page
This RGB LED Wall Washer is 8" in diameter with 36W 24VDC rated power use. It has 12 red, 12 green and 12 blue - 1 watt LEDs to produce bright and vivid lighting on walls, buildings, ceiling and signs. This wall washer is able to produce up to 16.7 million shades of amazing color. This light fixture can project light up to 130 feet and due to the unique design of the 25° X 75° stripped lenses for each LED. See more

This light is encased in an IP65 water-resistant aluminum housing. Tempered glass and stainless fasteners give this light long lasting outdoor use. The light can be controlled by RGB or DMX controllers using a 4-pin, 3-loop common anode connection. We recommend no more than three 36 watt wall washers connected in a series. An attached 80" water-resistant connector cord is included with every light. See Product Data Sheet and Installation Guide linked below. For easy connection of wall washers, power supplies and controllers, use the many waterproof connectors wire options. Non-submersible, RoHS and CE approved. Hide

Out of Stock
Bright Star 12" x 6" LED Wall Washer 3 in 1 RGB - 50W, 24VDC

SKU - WW-SC-RGB6     View Product Page
This RGB LED Wall Washer is a 12" X 6" rectangle with 50W 24VDC rated power use. It has 18 RGB 3 in 1 LEDs to produce bright and vivid lighting on walls, buildings, ceiling and signs. This wall washer is able to produce up to 16.7 million shades of amazing color. This light fixture can project light up to 70 feet.  See more

This light is encased in an IP65 water-resistant aluminum housing. Tempered glass and stainless fasteners give this light long lasting outdoor use. The light can be controlled by RGB or DMX controllers using a 4-pin, 3-loop common anode connection. We recommend no more than three 50 watt wall washers connected in a series. Attached male and female waterproof connection lead wires included. See Product Data Sheet and Installation Guide linked below. For easy connection of wall washers, power supplies and controllers, use the many waterproof connectors wire options. Non-submersible, RoHS and CE approved. Hide

Water-Resistant RGB LED Signal Amplifier, 12-24VDC 5A/CH

SKU - LC-SC-2RGBA     View Product Page
This water-resistant 12 or 24VDC Signal Amplifier can be used to extend the control signal from you LED controller to your LED Lights. 5A x 3 channels for a Max output of 180 watts at 12VDC or 360W at 24VDC. DC 12 or 24V Power In, Signal In and Signal Out screw-down style connectors. Aluminum enclosure with polyurethane gaskets. Non-submersible.

4 Wire T Connector for RGB LED Wall Washers

SKU - LA-SC-2CON     View Product Page
This T or elbow water-resistant connector can be used to connect our RGB wall washers to each other, to a contoller or signal amplifier, or can be used with our waterproof RGB connection wire to pigtails for easy connection with any RGB LED lighting system. 12" long with screw down connection, two males and one female. See the link below for an easy RGB LED connection guide using water-resistant RGB LED connection wires.

Wallwasher Waterproof Connector 2 wire 80"

SKU - LA-SC-3CON     View Product Page
This is a waterproof connector with 2 conductor 18AWG wire that can be used to extend the length of the DC connection on our Wall washer power supplies or controllers. 80" long with screw down connections, male on one end and a female on the other end.

RELATED PRODUCTS