This is a DMX signal Cable with a XLR5 female plug on one end and XLR3 male plug on the other with 36" of lead wire in between. This cable will allow you to connect a DMX device that has XLR3 output plugs to an XLR5 input plug.
SKU: LC-EU-DMX-PX243View Product Page This DMX driver allows for 24 Channels of LED lights to be controlled via a DMX control signal. With two DC power inputs, one for channels 1-12 and the other for 13-24, this driver can control 12 channels of LED lights of similar or variating voltage inputs. This driver accepts either XLR-3 type connections or bare wire connections for the DMX signal input and output. There are a total of eight, 3 channel, common anode outputs with screw-down terminal blocks for easy connection to your LED lights. This driver is able to accept 5-24VDC at 3A per channel (twenty four channels total) for max load of 360W/5V, 864W/12V, or 1728W/24V. You can set the starting address of the DMX driver via DIP switches located on the back of the unit. Please note that each DMX driver requires 24 addresses in the DMX universe being used. A built in LED light test mode is available with this DMX driver. Systems with more than two DMX drivers being used require an XLR3 DMX terminator cable on the last DMX driver in the series.