Header Logo
FREE SHIPPING OVER $200
Orders Shipped within Continental United States * Non Oversized Items
ORDER ONLINE TO USA AND CANADA WE CAN SHIP WORLDWIDE PLEASE CALL TO ORDER

Aluminum Mounting Track for 10mm Side Emitting Flat & Round Top LED Neon

SKU: LN-DX-NEA-AP-17

Product Description

This product is a 1 meter long (3.28ft) aluminum track for mounting our flat top and round top RGB and single color LED neon flex. This product is intended only for our 10mm RGB, white and warm white side emitting neon flex strips listed below. Each 3.28 foot of mounting track includes two 1" long self tapping screws. The track is designed with extra space for screw heads so there is no need to counter sink. Easily install the track by mounting and then pushing the LED neon flex strip into place. This track enables smooth and straight linear lighting, with no sags, annoying light dots or hot spots. Please note that factory wire leads, end caps, and connectors do not fit inside the track.

Product Specifications

RGB LED Neon Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)

SKU: LN-DX-NE-RGB-FH-5     View Product Page
Our flat topped side emitting and horizontal bending RGB Neon LED Strips can be used to create smooth shadow and glare free colored lighting on walls and curved surfaces. You won't need a plastic cover or diffuser when you use these strips because they are encased in a special milky silicone molding. This product is ideal for architectural accents, signs, displays, night clubs, storefronts, interior designs, or any application where a dot free color changing light is desired. Six 3in1 LEDs per every 2.46" cuttable section produces 44 lumens per foot when all colors are on full brightness. This neon flex strip is side emitting, meaning it can only bend on a horizontal axis. Each 5 meter roll comes with 10 mounting clips, 10 self-tapping screws, 1 wire lead setup, and one end cap. You can cut this neon flex every 2.46" but you must be able to solder a wire lead to re-connect. A power draw of 4.61 watts of 24VDC power for each foot means the 16.4ft roll would need 76 watts minimum of 24VDC power and RGB color control to light on full brightness. This product is ETL listed, RoHS and CE approved.

RGB LED Neon Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)

RGB LED Neon Round Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)

SKU: LN-DX-NE-RGB-RH-5     View Product Page
Our newly added Side Emitting RGB Neon Flex has a special rounded top design that mimics traditional neon lighting without dangerous operating voltage or harmful chemicals. Each 16.4ft of neon flex is designed with a dual core milky silicone extrusion that is salt water resistant and won't yellow in the sun over time. The spherical design outputs 170° beam angle, side emitting which allows for bending on a horizontal axis. There is no need for a plastic cover or diffuser when using this product, create vibrant colors and color change functions without any visible dots or hot spots. This product is ideal for architectural accents, signs, displays, night clubs, storefronts, interior designs, or any application where a dot free color changing light is desired. Six 5050 LEDs per every 3.94" cuttable section produces 35 lumens per foot when all colors are on full brightness. Each 5 meter roll comes with 10 mounting clips, 10 self-tapping screws, 1 wire lead setup, and one end cap. You can cut this neon flex every 3.94" but you must be able to solder a wire lead to re-connect. A power draw of 3.51 watts of 24VDC power for each foot means the 16.4ft roll would need 58 watts minimum of 24VDC power and RGB color control to light on full brightness. This product is ETL listed, RoHS and CE approved.

RGB LED Neon Round Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)

White LED Neon Round Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)

SKU: LN-DX-NE-WH-RH-5     View Product Page
Our Side Emitting White (6,000K) LED Neon Flex has a special rounded top that imitates traditional neon lighting without risky operating voltage or nasty chemicals. Each 5 meter roll of has a dual core silicone housing that is IP67 waterproof rated, salt water, and UV resistant. The special milky coating creates unobtrusive dot free illumination for a line of light effects on walls, buildings, displays, and architecture. This strip is designed to bend on a horizontal axis and requires clips or mounting profile to adhere. Use this neon led indoors and outdoors for a variety of lighting projects both functional and decorative. This strip requires 24 volt DC input and consumes 3.51 watts of power per foot, at full brightness. This product is dimmable by our PWM low voltage dimmers or by our magnitude dimmable power supplies with compatible wall switch. This strip can be cut and re-connected every 1.97" and comes with 1 extra wire lead setup, 1 end cap, and 10 mounting clips. Each 5M roll of neon flex is ETL listed, RoHS and CE approved.

White LED Neon Round Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)

Warm White LED Neon Round Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)

SKU: LN-DX-NE-WWH-RH-5     View Product Page
Our Side Emitting Warm White (3,000K) LED Neon Flex has a special rounded top that imitates traditional neon lighting without unsafe operating voltage or toxic chemicals. Each 5 meter roll of has a dual core silicone housing that is IP67 waterproof rated, salt water, and UV resistant. The special milky coating creates unobtrusive dot free illumination for a line of light effects on walls, buildings, displays, and architecture. This strip is designed to bend on a horizontal axis and requires clips or mounting profile to adhere. Use this neon led indoors and outdoors for a variety of lighting projects both functional and decorative. This strip requires 24 volt DC input and consumes 3.51 watts of power per foot, at full brightness. This product is dimmable by our PWM low voltage dimmers or by our magnitude dimmable power supplies with compatible wall switch. This strip can be cut and re-connected every 1.97" and comes with 1 extra wire lead setup, 1 end cap, and 10 mounting clips. Each 5M roll of neon flex is ETL listed, RoHS and CE approved.

Warm White LED Neon Round Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)

Product Reviews

Note: * Indicates a required field

Review Information

(email address will not be displayed)
Your Rating
reCAPTCHA Verification

- There are currently no reviews for this product

My Cart
Your Cart is currently empty.
Registered Users
 
Keep my login information
Top