SKU: LC-EU-DIM-1
*NOTE: THIS IS NOT A DIMMER FOR 0-10V LED LIGHTS*
A three channel LED PWM Dimmer for use only with analog 0-10V control signal. Compatible switches include Lutron Diva, part# DVTV, and the Lutron Nova, part# NTFTV, as well as Graffik Eye Systems with certain interfaces and panels including TVM Modules, or RadioTouch RF wireless control systems. Input power source must be 12-24VDC, as well as 12-24VDC output power to your three channel LED Lighting product. Three channels, 5A per channel with a maximum power of 180W at 12VDC, 360W at 24VDC. For use with common anode style LED Lighting. The power supply and signal wires are connected by screw down type wire connections.
SPECIFICATIONS | |
Model | 3 Channel 0-10V PWM Dimmer |
SKU | LC-EU-DIM-1 |
Dimensions | 4.92"L x 1.77"W x 1.42"H |
Dimming Frequency | 780 Hz |
Input Power | 12 - 24VDC |
Output Power | 5A x 4CH |
Maximum Watts | 12VDC - 180W 24VDC - 360W |
Rating | Indoor |
Operating Temp | 0° ~ 125°F |
Warranty Period | 1 Year |
Mean Well LED Power Supply Three Output 200W - 12VDC
SKU: PS-MW-200-12 View Product Page
A Mean Well 200W 12VDC LED Power Supply / Transformer, with a selectable AC input of either 100-120VAC or 200-240AC and 12VDC output through three terminals. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload, over voltage, and over heating shut down protection guards the unit from any improper use. This power supply can also withstand a 300VAC input surge for up to 5 seconds. It can be used to connect 12VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 12VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 180 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.
ES3 RGB LED Module with 160° Lens - 12VDC
SKU: MD-HT-ES3-RGB View Product Page
This LED module is a great color changing backlight module for channel letters, halo lighting and sign lighting. The 160° beam angle provides a wider beam angle that enable less modules to be used with more even lighting diffusion. This product easily conforms to circular and curved layouts. A total of three 5050 SMD chips provide ample lighting with a max power requirement of 0.72W per module. Each module can be cut anywhere on the lead wires between each module. In addition to being able to be used for sign lighting these modules are great for cove and accent lighting and for use as under-cabinet general illumination. A constant voltage DC power source is needed to power this product. The injected plastic molding ABS shell provides long lasting and durable protection from the elements with a quality PC board and 3 surface mount LEDs below. No more than 20 modules should be powered in a serial connection, 40 modules can be powered in a looped circuit. Please use parallel connections for larger lighting runs. IP66 rating is totally dust tight with protection against direct high pressure water jets (non-submersible) for both indoor and outdoor lighting applications.
Note: * Indicates a required field
Great Controller
I'm using this to control a RGB LED light strip in a machine enclosure with a PLC's analog signals. It works perfect. I will use these going forwards in all my projects.
Dec 6, 2019 | Paul