Waterproof Wire 2 Port Junction Box, 1-4 Conductor

2 Conductor Outdoor and Waterproof Wire - 18AWG

SKU: OA-SC-2C     View Product Page
This is a 2 conductor outdoor and waterproof stranded wire, made for use with any of our single color indoor or outdoor rated LED lighting products. Use this 18AWG stranded wire with our strip lights, modules, wall washers, or any low voltage DC system. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.

4 Conductor Outdoor and Waterproof Wire - 18AWG

SKU: OA-SC-4C     View Product Page
This is a 4 conductor 18AWG encased outdoor and waterproof wire, made for use with our stainless steel IP68 junction boxes or any other indoor or outdoor LED lighting project. Use this wire with our underwater and outdoor RGB LED fixtures, Strip Lights, Modules, or any other low voltage DC system. If used properly with our junction boxes this wire can be be fully submersible and dust concealed to supply an RGB Control signal to as many fixtures as your junction box will allow. This wire is also a great option for any indoor or outdoor RGB LED projects requiring a 4 conductor encased wire. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.

Waterproof Wire Jumper Connector, 1-4 Conductor

SKU: OA-GW-CON-1     View Product Page
Our black nylon cable jumper can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your 1-4 conductor LED wiring. Each end has an M20 x 1.5 type connector with a rubber grommet designed to seal any of our 0.2" - 0.35" diameter cables. Inside each jumper is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 16A 450VAC max rating. The design of the clamping rubber grommet creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout. This easy to use connector makes combining two pieces of wire quick and effortless for a secure and permanent wire connection.

Waterproof Wire 3 Port T Connector, 1-4 Conductor

SKU: OA-GW-CON-3     View Product Page
Our black nylon waterproof 3 port junction box can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing grommets will work on any 0.2" - 0.35" diameter cables. Inside each junction box is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 24A 450VAC max rating. The design of the clamping rubber interior creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout.

Waterproof Wire 4 Port Connector, 1-4 Conductor

SKU: OA-GW-CON-4     View Product Page
Our black nylon waterproof 4 port junction box can be used with our outdoor waterproof 2 and 4 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing grommets will work on any 0.2" - 0.35" diameter cables. Inside each junction box is a 4 pin screw down type connector for conducting electricity using 1 to 4 of the available ports with a 24A 450VAC max rating. The design of the clamping rubber interior creates a tight and enclosed seal for a wide range of wire gauges without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout.

Waterproof Wire 8 Port Connector, 2-5 Conductor

SKU: OA-GW-CON-8     View Product Page
Our black nylon waterproof 8 port junction box can be used with our outdoor waterproof 2, 4 and 5 conductor wires to create an IP68 waterproof, and dust free seal as well as a secure housing for your LED wiring. The rubber sealing glands will work on any 0.25" - 0.35" diameter cables. Use with our 8 port lever wire nuts (sold separately) for quick and easy connections. The design of the clamping rubber interior creates a tight and enclosed seal without damaging your wire or devices, as well as decreasing tension from wire connections for a safer and more efficient wiring layout. Each junction box includes 4 rubber plugs in order to use 4-8 of the available wire ports.

(10) 1 Wire Solderless Snap Down Butt Connectors, 18-24AWG

SKU: LA-LU-WC-1WB-10     View Product Page
Our solderless single pole snap down butt connectors are designed to easily connect two pieces of 18-24AWG stranded wire together without soldering or wire stripping. Each end of the connector has built in conductive metal blades to perforate and secure your 18-24AWG stranded wire, so no wire strippers are required. Simply insert your wire through the intended wire hole and press down with a pair of pliers. Unlike standard crimping style butt connectors, these connectors can easily be re-used multiple times over. Each connector is rated for a max voltage of 300V AC/DC not to exceed 10 amps. These connectors are sold in sets of 10 and can be used with our T and snap connectors for various wiring circuits.