Our commercial grade UL Listed 24VDC color changing RGB LED Strip Light is IP66 waterproof using 180 super bright 3 in 1 RGB SMD LEDs per 118" to produce over 16 million shades of brilliant color. The waterproof silicon housing makes this LED Strip durable in most conditions that require a waterproof, dustproof, and UV proof color changing linear light. This product is not intended to be submersed for extended periods. There are 6 LEDs every 4 inches. This 118" (3m) roll is excellent when you need a very colorful indoor or outdoor RGB light strip. Comes with 3M™ VHB™ mounting tape on the back, for the best long-term mounting solution. 43W of constant voltage 24VDC power needed for this 118" strip (4.3W per foot). This RBG LED light ribbon can be used for entertainment lighting, bar lighting, casino lighting, landscape lighting, yacht lighting, 24V Marine applications, patio lighting, or any other indoor or outdoor 24VDC application. Each roll includes a waterproof connector at each end, additional connector to bare wire, 2 end caps without holes, 2 end caps with wire holes and 10 mounting clips, all other accessories are sold separately. See link below for demonstration video. This LED Strip is UL Listed for class 2 luminaries and fixtures, RoHS and CE approved.
|Model||Ribbon Star RGB 180 LED Waterproof 118" (3m)|
|Dimensions||118" x 0.52" x 0.28"H|
|Connection Type||4 Wire RGB(+)|
|LED Chip Type||5050|
|LED Quantity||6 SMDs per 4 inches|
|LEDs Per Strip||180 RGB 3 in 1 SMD LEDs|
|Input Power||24VDC Constant Voltage|
|Watts||4.3W per foot|
|Max Serial Connection||30 Feet|
|Certification||UL Listed, RoHS, CE|
|Warranty Period||2 Years|
|Downloads & Info|
|Click For Product Data Sheet|
|Click for Light Box Diffusion Guide|
|Click For Demonstration Video|
|RGB Strip Light Soldering Tutorial|
|Determining the Proper Power Supply Tutorial|
|Installing RGB Controller & Signal Amplifier Tutorial|
For B2B or Large Quantity Price Info Click Here
4 Conductor Outdoor and Waterproof Wire - 18AWG
SKU: OA-SC-4C View Product Page
This is a 4 conductor 18AWG encased outdoor and waterproof wire, made for use with our stainless steel IP68 junction boxes or any other indoor or outdoor LED lighting project. Use this wire with our underwater and outdoor RGB LED fixtures, Strip Lights, Modules, or any other low voltage DC system. If used properly with our junction boxes this wire can be be fully submersible and dust concealed to supply an RGB Control signal to as many fixtures as your junction box will allow. This wire is also a great option for any indoor or outdoor RGB LED projects requiring a 4 conductor encased wire. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.
TPU End Cap for RGB Waterproof LED Strips
SKU: RA-SC-RS-RGB-EC View Product Page
This TPU (Thermoplastic Polyurethane) end cap is made to cap the end of your Color Changing Ribbon Star RGB LED Strip Lights with TPU coating. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip.
TPU End Cap with hole for RGB Waterproof LED Strips
SKU: RA-SC-RS-RGB-ECH View Product Page
This TPU (Thermoplastic Polyurethane) end cap with holes is made to cap the end your waterproof RGB strip light while allowing connection wires to pass through. Use this end cap with an industrial strength plastic bonding adhesive to close and seal your exposed cuts to water and outdoor proof your LED Strip wire connections.
(10) Mounting Clips for Ribbon Star Waterproof Strip Lights
SKU: RA-SC-RS-T-CL-10 View Product Page
These are 10 plastic mounting clips made for use with any of our Waterproof TPU coated LED Strip lights. Use these clips for long term mounting of your waterproof LED Strip lights. Two screw holes make for simple installation. Sold in packs of 10 clips. Click the thumbnail image for clip dimensions.