SKU: LC-LF-1AMP
Our 1 channel signal amplifier / repeater is designed for larger lighting circuits to extend a PWM Dimming signal to additional single color low voltage LED Lights. Once you have met the power limitations of your LED dimmer you can use this amplifier to dim an additional 30A of lights, or 360W at 12VDC / 720W at 24VDC. Simple to use screw down terminals make for an easy and secure connection for your power input and output connections. This product is intended for use with single color LED strip lights, modules, wall washers, or LED lighting fixtures that operate on 12VDC or 24VDC power.
SPECIFICATIONS | |
Model | 1 Channel LED Signal Amplifier |
SKU | LC-LF-1AMP |
Dimensions | 3.35" x 2.44" x 1.38"H |
Input Connection | 2 Wire (+/-) |
Output Connection | 2 Wire (+/-) |
Input Power | 12 - 24VDC |
Output Power | 30A x 1CH |
Maximum Watts | 12VDC - 360W 24VDC - 720W |
Rating | Indoor |
Operating Temp | -4° ~ 140°F |
Warranty Period | 1 Year |
LED Dimmer with Key Fob RF Remote, 12-24V 30A
SKU: LC-LF-1DIM View Product Page
Our small sized LED dimmer uses a uniquely paired key fob RF remote to dim and control your 12-24VDC constant voltage LED lights. The impressive 30 amp output allows for dimming control of larger circuits without the need of additional accessories. DC input and output wires can easily be secured using the screw down connectors. Dim up to 360 watts of lighting using 12 Volt products or 720 watts using 24 Volt products. Choose from 5-100% range of dimming levels using two simple arrow buttons on the remote. Our key fob led dimmer can be used to dim LED strip lights, LED modules, LED wall washers, or for dimming any one color common anode 12VDC or 24VDC LED products. Each RF Remote requires (2) 3V / CR2016 type batteries (included) and is paired with a unique RF frequency to prevent command crossover when using multiple units.
PWM LED Knob Dimmer, 12-24VDC 30A
SKU: LC-LF-2DIM View Product Page
This small and simple LED Light Dimmer uses a knob to dim your 12-24VDC constant voltage LED lighting products from 0-100%. The impressive 30 amp output allows for dimming control of larger circuits without the need of additional accessories. DC input and output wires can easily be secured using the screw down connectors. Dim up to 360 watts of lighting using 12 Volt products or 720 watts using 24 Volt products. The small size of this PWM dimmer makes it easy to conceal and set the lights to the brightness level you prefer. Use this dimmer for LED strip lights, LED modules, LED light Ribbon or for dimming pretty much any one color LED product with 12-24VDC constant voltage power requirements.
Mean Well LED Power Supply CV 350W - 12VDC
SKU: PS-MW-350-12 View Product Page
This Mean Well 350W, 12VDC LED Power Supply / Transformer, has a 115VAC or 230VAC input and 12VDC output through three terminals. For dry locations only. Has screw down style connections. Comes with plastic covering to protect screw down terminals and a cooling fan to prevent high heat during operation. Note: The cooling fan runs noisy and may not be suitable for all applications. It can be used to connect LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other LED Lighting products. UL Recognized and CE approved. Only install face up or in a manner that the cooling vents face upwards with sufficient breathing space.
Note: * Indicates a required field
- There are currently no reviews for this product