SKU: LB-LG-3R-RGBW
Our 2.95" Round RGBW Spot Fixtures are a bright and unique product that can be used to bring color changing plus cool white illumination to a variety of lighting applications. Whether using for downlighting or accenting cabinets, shelves, or coves all these lights need is a place to install the mounting bracket and a hole to run the wires. You can flush mount the lights if you have a recession and a hole 2.95" (75mm) in diameter or surface mount to any rigid material. 5 durable RGBW 4 in 1 Epistar LEDs output some serious light from a small package, requiring 20 watts of 24VDC to operate with all colors on full brightness. A 50,000 hour lifetime span ensures that these lights will last, as well as save money on the low cost to power. Bring billions of color choices to any indoor space using our 20W RGBW 24VDC LED spot light fixtures. 24VDC power as well as an RGBW control signal needs to be wired on each fixture to operate, see installation guide below for reference.
| Click For Product Data Sheet |
| RGBW Spot Connection Guide |
| Calculate Electrical Load | |
| * Power Supply capacity must be larger than minimum lighting load. | |
| SPECIFICATIONS | |
| Model | RGBW LED Spot Light Fixture - 20W |
| SKU | LB-LG-3R-RGBW |
| Dimensions | 2.95"⌀ x 3.94"H 19" Lead Wires |
| Connection Type | 5 Wire RGBW(+) Signal In 2 Wire 12/24VDC (+/-) Power In |
| Power | 24VDC |
| Watts | 20 Watts |
| Beam Angle | 60° |
| Lumens | R: 200 lm G: 350 lm B: 125 lm W: 500 lm |
| Max Serial Connection | Unlimited (DC Power to Each Fixture) |
| Lifespan | 50,000 Hours |
| Warranty Period | 1 Year |
Wall Mount 4 Zone Wireless RGBW LED Controller with DMX Output
SKU: LC-LT-RGBW-UX8 View Product Page
Our state of the art UX8 RGBW wall mounted controller uses cutting edge technology to create customized wireless RGBW LED lighting control for your indoor lighting needs. Compatible 2.4GHz RF wireless RGBW receivers are designed to pair to the wall mount controller. Pair an unlimited amount of wireless receivers to 4 zones within the RF signal radius of 150ft (line of sight). The wall mounted unit allows you to control each zone independently or together in the groups of your choosing. With the addition of a Wifi-104 controller you can pair your wall mounted unit to your home or business WiFi network and then take control of your 4 zones and create custom DIY lighting scenes using a free smart phone application. Please note that the WiFi-104 light output is not controllable through the RGBW wall mount controller, you must use RF wireless receivers to successfully control your lights from both your phone and wall mount panel. With the addition of a DMX signal output there is also the option of using 4 Channel DMX decoders or fixtures to control your 4 lighting zones, simply set your DMX fixture to the proper address for unlimited control over 4 zones. Zone 1 = DMX address 1, Zone 2 = DMX address 5, Zone 3 = DMX address 9, and Zone 4 = DMX address 14. There are a variety of ways you can use this controller so be sure to observe the maximum load ratings of the receiver of decoder that you are using to power your low voltage RGBW LED lights. For connection examples click the wiring tab in the specification box below. One 5VDC transformer is included with each controller for powering the unit.
4 in 1 Wifi LED Network Controller and Dimmer for Smartphones or Tablets, 12-24VDC 4A/CH
SKU: LC-LT-RGBW-WIFI View Product Page
The WiFi-104 is the latest of our Wifi LED Controllers, allowing the user to control RGB+W, RGB, two tone, and Single Color LED Strip Light all from your smart phone or tablet through the free 'WiFi-104' app. With this controller you do not have to switch from your home network to get back on the internet, but it still can be used remotely as it's own WiFi source. Each WiFi-104 can control up to 12 zones separately with unlimited receivers per zone using 2.4GHz Wi-Fi, 802.11b/g/n Protocol. This means you can control any type of 5-24VDC in twelve places throughout your WiFi area. 12 built in modes including DIY functionality, color wheel choices, as well as specific 0-255 brightness settings, this controller is one of the most versatile we've seen. Output ratings of 4A x 4 channels allow this controller can handle up to 48W per channel at 12VDC or 96W per channel at 24VDC. Each additional wireless zone receiver can handle 5A x 4 channels or 60W per channel and 240W when all channels are being used, with a 150ft RF signal radius (line of sight). Adjustable SSID settings allow for 16 different WiFi controllers to be operated as their own WiFi device in one space, see the instruction manual below for all of the great features of this product including saving and building custom scenes and pairing the wireless 12 zone receivers. This product is CE and RoHS approved.
Mean Well LED Power Supply Three Output 200W - 24VDC
SKU: PS-MW-200-24 View Product Page
A Mean Well 200W 24VDC LED Power Supply / Transformer, with a selectable AC input of either 100-120VAC or 200-240AC and 24VDC output through three terminals. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload, over voltage, and over heating shut down protection guards the unit from any improper use. This power supply can also withstand a 300VAC input surge for up to 5 seconds. It can be used to connect 24VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 24VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 180 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.
Note: * Indicates a required field
- There are currently no reviews for this product
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
