Our Mean Well brand 40 Watt, 5VDC Power supply can be used with our 5VDC Digital Pixel LED dot lights and 5VDC LED strip lights. A universal 100-240VAC input with detachable 3 prong power cord makes for quick and safe operation from your high voltage input to your 5VDC output. Short circuit, overload, and overheating protection ensure that power supply will function safely within the specified operating environment. The 5V output cord has a standard sized 5.5mm x 2.1mm female barrel plug attached and one 5.5 X 2.1mm Male Barrel Jack with screw down terminals is included for effortless wiring to your 5VDC lights or controls. This AC to DC transformer is UL listed and complies with EISA 2007, NRCan, AU/NZ MEPS and EU ErP standards.
|Model||Mean Well 40W Plug-in Power Supply|
|Dimensions||4.92" x 1.97" x 1.24"H|
|AC Input||100 - 240VAC|
|DC Output||5VDC / 8A|
|Output Watts Max||40 Watts|
|Operating Temp||-22° ~ 140°F|
|Operating Humidity||20 ~ 90%RH non-condensing|
|Warranty Period||1 Year|
50 Digital 1 Chip RGB LED Pixel Dot Modules - 1903IC 5VDC
This product is a 5VDC Digital Pixel LED with a 1903 type IC chip. Control each LED pixel using DMX control or any compatible controller for a 1903 type IC chip. Each pixel light uses 3 DMX channels and will flow in sequence from the starting channel, 150 DMX channels per 50 pixels. 0.3W per module, requiring 15W of 5VDC power per 50 modules. These modules easily install in any 0.47"(12mm) diameter hole. If you are not sure this is the right product for you please call and consult a sales associate before ordering.
1809 IC Type DMX to Digital Decoder, 5-24VDC 512CH
SKU: LC-LT-DMX-1809 View Product Page
This LED DMX Decoder converts a DMX control signal to an SPI digital signal compatible with 1809, 1803, 1804, 1812, 1903, 1909, 1912, 2903, 2909, 2912, 2811, and 2812 type IC LEDs. This product will work with 5-24VDC digital pixel lights, strip lights, or modules with any compatible IC chip mentioned above. This product will not work with any other type of LEDs not mentioned above. Outputting an entire 512 channel DMX universe this decoder can control up to 170 RGB fixtures with compatible IC chips. This product accepts both XLR3 and bare wire connections for DMX input and output. Built in dip switches allow for custom setting of beginning DMX address, all other DMX addresses will follow in sequence. Keep in mind that this decoder should not power more than 5A of lighting and additional power must be provided evenly to large amounts of digital products. If you have any questions about this product please call before ordering.