This 4 chip 12VDC green LED backlight module is a great low cost and reliable LED module for signs, channel letters, halo lighting, accent lighting, or for circular and curved layouts. A total of four 5050 SMD chips provide ample lighting with a max power requirement of 0.96W per module. Each module can be cut anywhere on the lead wires between each module. In addition to being able to be used for sign lighting these modules are great for accent lighting, cove lighting, under-cabinet,above cabinet and general colored accent lighitng. A constant voltage 12 Volt DC power source is needed to power this product. The plastic ABS shell and clear epoxy coating provides limited water-resistance to moisture and an IP65 rating. This module is non submersible and non UV proof.
|Click For Product Data Sheet|
|Click For Electrical Load Calculator|
|Model||ES4 LED Backlight Module - Green|
|Dimensions||1.67" x 1.67" x 0.42"H|
|Connection Type||2 Wire (+/-) 20AWG|
|LEDs Chip Size||5050|
|LEDs Quantity||4 LEDs per Module|
|Module Spacing||5.5" Center to Center|
|Modules Per Foot||2.18 Modules|
|Watts||0.96 Watts per module|
|Operating Temp||-4° ~ 122°F|
|Max Serial Connection||50 Modules|
|Lifetime Hours||50,000 Hours|
|Warranty Period||1 Year|
|Downloads & Info|
|Click For Product Data Sheet|
2 Conductor Outdoor and Waterproof Wire - 18AWG
SKU: OA-SC-2C View Product Page
This is a 2 conductor outdoor and waterproof stranded wire, made for use with any of our single color indoor or outdoor rated LED lighting products. Use this 18AWG stranded wire with our strip lights, modules, wall washers, or any low voltage DC system. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.
Magnitude LED Power Supply Dimmable by Magnetic Low Voltage Dimmer 12V - 60W
SKU: PS-MT-60-12 View Product Page
If you have you been looking for a way to dim your LED Lights from a wall mounted dimmer, then this is the LED Power Supply for you. Use any compatible low voltage magnetic dimmer and dim your LED lights from 0-100%. This power supply is ETL listed, CSA listed, and encased in a NEMA 3R enclosure. Limited power source output allows for class 2 wiring. Built in manual reset thermal circuit breaker allows for shutdown upon an electrical short. 120VAC input voltage only, 60Hz. Output 12VDC up to 60w. Can be dimmed with standard low voltage magnetic dimmer, see list of compatible dimmers below. Transformer is fully encapsulated for protection against the elements. No External Fusing Required. Avoid using dimmers not rated for magnetic low voltage lighting or not labeled as symmetrical forward phase as they may cause overheating of the power supply or cause damage to the load. It is also not recommended to use dimmers with neutral connections or dimmers requiring a minimum load for proper operation. The transformer requires 50% load if not being used with a dimmer.
110V Wall Plug Cord Three Prong - 6ft
SKU: LA-EL-CON1 View Product Page
A three prong 110V wall plug power cord for LED Power Supplies. This cord is used to connect a power supply to a 110 volt outlet. 16AWG, 6' long 3 prong, 3 wire. Black wire = Load, White wire = Neutral, Green wire = Ground.
Note: * Indicates a required field
- There are currently no reviews for this product