This 4 chip 12VDC red LED backlight module is a great low cost and reliable LED module for signs, channel letters, halo lighting, accent lighting, or for circular and curved layouts. A total of four 5050 SMD chips provide ample lighting with a max power requirement of 0.96W per module. Each module can be cut anywhere on the lead wires between each module. In addition to being able to be used for sign lighting these modules are great for accent lighting, cove lighting, under-cabinet,above cabinet and general colored accent lighitng. A constant voltage 12 Volt DC power source is needed to power this product. The plastic ABS shell and clear epoxy coating provides limited water-resistance to moisture and an IP65 rating. This module is non submersible and non UV proof.
|Click For Product Data Sheet|
|Click For Electrical Load Calculator|
|Model||ES4 LED Backlight Module - Red|
|Dimensions||1.67" x 1.67" x 0.42"H|
|Connection Type||2 Wire (+/-) 20AWG|
|LEDs Chip Size||5050|
|LEDs Quantity||4 LEDs per Module|
|Module Spacing||5.5" Center to Center|
|Modules Per Foot||2.18 Modules|
|Watts||0.96 Watts per module|
|Operating Temp||-4° ~ 122°F|
|Max Serial Connection||50 Modules|
|Lifetime Hours||50,000 Hours|
|Warranty Period||1 Year|
|Downloads & Info|
|Click For Product Data Sheet|
2 Conductor Outdoor and Waterproof Wire - 18AWG
SKU: OA-SC-2C View Product Page
This is a 2 conductor outdoor and waterproof stranded wire, made for use with any of our single color indoor or outdoor rated LED lighting products. Use this 18AWG stranded wire with our strip lights, modules, wall washers, or any low voltage DC system. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details. This wire is UL recognized.
PWM LED Knob Dimmer, 12-24VDC 30A
SKU: LC-LF-2DIM View Product Page
This small and simple LED Light Dimmer uses a knob to dim your 12-24VDC constant voltage LED lighting products from 0-100%. The impressive 30 amp output allows for dimming control of larger circuits without the need of additional accessories. DC input and output wires can easily be secured using the screw down connectors. Dim up to 360 watts of lighting using 12 Volt products or 720 watts using 24 Volt products. The small size of this PWM dimmer makes it easy to conceal and set the lights to the brightness level you prefer. Use this dimmer for LED strip lights, LED modules, LED light Ribbon or for dimming pretty much any one color LED product with 12-24VDC constant voltage power requirements.
Mean Well Waterproof LED Power Supply 60W - 12VDC
SKU: PS-MW-60-W-12 View Product Page
This 60 Watt Constant Voltage LED Power Supply by Mean Well is suitable for wet or dry locations and is capable of supplying no more than 60W or 5 Amps of 12VDC power output. This AC/DC transformer takes a 100-240VAC input and converts it to a 12VDC output for a Class 2 rating. Built in overload, and over voltage protection protect this power supply from incorrect installation. Use this Mean Well LED Power supply to power 12VDC constant voltage LED Strip lights, LED Modules, or any other LED product with a 12VDC rating. The IP67 water-resistant rating is not intended for direct exposure to outdoor elements. UL recognized, class 2, and LPS approved.