Waterproof Neon RGB LED Strip Light, Top Emitting - ETL 24VDC - 197" (5m)

SKU: LN-DX-NEON-RGB-5     View Product Page
Create dot free color changing illumination without the addition of a plastic cover or diffuser using our top emitting RGB neon strip light. A special milky silicon coating is extruded around a high density 24VDC RGB strip light to create brilliant line of light 180° color output without any visible dots or hot spots. Constructed with a double-hollow air layer for good heat dissipation this strip is ideal for accent lighting around rooms, signs, displays and so much more. Six 5050 LEDs per every 1.97" cuttable section this strip outputs an impressive 213 lumens per foot when all colors are on full brightness. Create millions of color varieties with the right 24VDC color controller. Keep in mind that this strip is top emitting and will only bend on a vertical axis. Once the strip is cut it must be soldered to re-connect and then sealed using an outdoor rated silicon adhesive. Double sided tape will not stick to the silicon material of this strip. Each 5 meter roll comes with 15 mounting clips, 15 self-tapping screws, 1 wire lead setup, and one end cap. Requiring 7.3 watts of 24VDC power for each foot, the entire roll of 16.4ft would need 120 watts minimum of 24VDC power to light on full brightness. This product is ETL listed, RoHS and CE approved.

Silicone End Cap for Round Top Emitting Neon Flex

SKU: LN-DX-NTR-EC     View Product Page
A silicone end cap for sealing non wired ends of both our RGB and Single Color Top Emitting Round Neon Flex Strips. This end cap is intended only for the Round topped version of the flex strip. Silicone Adhesive is required to maintain IP66 waterproof level. All accessories can be found in products listed below.

RTV 4500 High Strength Silicone Sealant - 2.8oz Clear

SKU: OA-AM-SIL-GLU     View Product Page
Use the RTV 4500 Silicone Sealant to adhere end caps and connectors to our waterproof silicone LED Strip Lights and Neon Flex Lights. RTV Silicone Sealant has excellent resistance to extreme temperature, moisture, ozone, vibration, and weathering. Product Specs: One-part acetoxy silicone rubber sealant Approved as a food grade silicone - NSF/ANSI Standard 51, USDA approved Will not crack or become brittle with age Application temperature -35 to 140° F.

Precision Micro Shears for Silicone Strip Housing and Small Wires

SKU: OA-AM-SIL-CUT     View Product Page
Our micro precision snipping shears are a great additional tool to have. They are especially useful when prepping waterproof strip lights for new wire connections. The small snips make it easy to cut through the silicone housing to expose the copper pads below for soldering. The snips can also be used for small precision wire and soldering cuts not exceeding 1mm diameter (0.04").