This Mean Well 600W, 24VDC LED Power Supply / Transformer, has a 100 - 240AC input and 24VDC output. For dry locations only. Built in short circuit, overload, over voltage, and overheating protection allows for system shutdown upon any of these circumstances. Forced air cooling by built in DC fan allows for cool operating temperatures. Note: The cooling fan runs noisy and may not be suitable for all applications. Working temperatures are -4°F through 140°F. CN3 port allows for remote control of this power supply. It can be used to connect large amounts of LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and any other 24VDC Constant Voltage LED Lighting products. UL Recognized and CE approved. Can connect up to 540 watts of 24VDC LED lights. Only install face up with sufficient breathing space.
|Model||600W, 24VDC LED Power Supply|
|Dimensions||10.5"L x 5.0"W x 2.5"H|
|AC Input Voltage||100 - 240VAC|
|DC Output||24VDC / 25A|
|Output Watts Max||600 Watts|
|Warranty Period||1 Year|
10m Roll - 32.8ft Long Run LED Strip Light, CRI > 90, 140 LEDs/m - ETL 24VDC
SKU: RL-DX-LR140 View Product Page
The LR140, 10m strip light roll is the brightest and highest output of our Ribbon Star Long Run series tape lights. With 140 LEDs per meter (42 per foot) and a constant current driving IC design, this entire 32.8ft strip can be powered from one end with consistent voltage and brightness from beginning to end. The top mounted 2835 LED chips generate less heat than older 3528 style while outputting high lumens with a longer lifespan. The CRI over 90 spec renders pure illumination of the lighting spectrum, making colors and displays more vibrant and true. A low power output of only 3.66 watts per foot and high lumen output up to 480 lumens per foot make this strip extremely efficient up to 131 lumens per watt. This light strip requires 24VDC power input, can be dimmed using low voltage PWM dimmer or dimmable power supply and can be cut and re-connected every 1.97" (5cm). See our 8mm connector options sold separately below as well as soldering guides for a more permanent connection.
Ribbon Star MegaLux, High Density White LED Strip Light - ETL 24VDC
SKU: RL-DX-MGL-W2-10 View Product Page
Our Ribbon Star MegaLux High Density White LED Strip Light is an extremely bright 24VDC LED Strip Light, outputting an incredibly bright 1,902 lumens per foot. This ETL Listed 118" (3m) LED ribbon can be cut every 1.31" and must be soldered to re-connect and should be mounted to a metal heat sink. Comes with a heavy duty double sided mounting tape on the back, for the best long-term mounting solution. Each strip consists of 8 high output 2835 SMD LEDs per 1.31" for a total of 720 SMD LEDs per 118" LED strip. This light requires at least 14.63 watts of 24VDC power per foot (0.61A/ft). This LED Ribbon strip is so bright it can be used for task, and general lighting in homes, businesses, interior lighting, light boxes, and signs. It can also be used for overhead lighting, cove, under cabinet, back lighting and many more applications. We recommended that you mount this strip to steel or aluminum for a good heat sink. 5700-6500K Color Temperature, ETL Listed, RoHS and CE approved.
110V Wall Plug Cord Three Prong - 6ft
SKU: LA-EL-CON1 View Product Page
A three prong 110V wall plug power cord for LED Power Supplies. This cord is used to connect a power supply to a 110 volt outlet. 16AWG, 6' long 3 prong, 3 wire. Black wire = Load, White wire = Neutral, Green wire = Ground.
Note: * Indicates a required field
- There are currently no reviews for this product