SKU: LC-LN-RGBW-AMP
A four channel LED Signal Amplifier / Repeater that can be used to add more RGBW LED modules, RGBW LED Strips or 5-24VDC RGBW LED Lights to your existing RGBW LED controller. Which in turn will allow the additional lights to perform the same color changes as the RGBW lights that are connected to the main controller. Product could also be used with 4 single color LED products. For use with Constant Voltage power, 5-24VDC systems only. Four channels, 8A per channel with a maximum power of 384W at 12VDC or 768W at 24VDC. For use with common anode style LED Lighting. The power supply and RGBW signal wires are connected by screw down type wire connections.
| SPECIFICATIONS | |
| Model | RGBW Signal Amplifier |
| SKU | LC-LN-RGBW-AMP |
| Dimensions | 6.6"L x 2.0"W x .90"T |
| Type | 4 Channel Common Anode |
| Constant Voltage DC Power | 5 - 24VDC, 8A x 4CH |
| Watts | 12VDC: 384W 24VDC: 768W |
| Rating | Dry |
| Warranty Period | 1 Year |
RGBW 4 Channel LED Signal Amplifier, 5-24VDC 8A/CH
4 Knob RGBW LED Controller with Digital Display & RF Remote, 12-24V 5A/CH
SKU: LC-LF-3RGBW View Product Page
Our 4 Knob RGBW LED Controller can be used to control your 4 Color RGBW LED Strip Lights, modules, or 12-24VDC constant voltage lighting fixtures. The digital display above each knob lets you see the 0-255 dimming values of your Red, Green, Blue, and White output levels. Combining all the options of each output you can create over 4 trillion different color hues and fine tune any color that you want. 37 built in color changing effects with speed and brightness adjustments can be accessed using the RF remote control. Each of the 4 color outputs can control up to 5 amps of LED lighting, or 60 watts using 12VDC, 120 watts using 24VDC. Multiply that value over the 4 channels and you can control up to 240 watts max at 12V or 480 watts max at 24V.
Ribbon Star RGB + White LED Strip Light - 60 LEDs per Meter - UL 12VDC - IP20 & IP67
SKU: RL-SC-RS50-RGBW View Product Page
This 4 color LED Strip Light combines RGB and White 5050 LED Chips into a single 16.4' roll. This UL Listed LED Strip can produce over 4 billion shades of brilliant colors using 255 levels of brightness adjustment on each color. There are 3 RGB and 3 White LED Chips every 4 inches. This 16.4' (5m) LED strip can be cut every 4 inches and can be reconnected by soldering or our quick connectors to bare lead wire. Comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 75W of constant voltage 12VDC power is needed for this 16.4' strip (4.4W per foot). All colors of this LED Strip Light can be controlled using our 4 Channel RGB Controller or through 4 DMX channels in a DMX universe. This RBG LED Light strip can be used for entertainment lighting, bars, casino lights, full color cove lights, RGB back lighting, under cabinet LED lighting, stage shows, or virtually any project that requires a full range of vivid LED color. For optimal light output we recommend you connect these lights no longer than 20ft in series. This product comes with two quick connectors to bare lead wire. See link below for demonstration video. This strip light is UL Listed, RoHS and CE approved.
Ribbon Star 50/50, RGB + Warm White LED Strip Light - UL 12VDC
SKU: RL-SC-RS50-RGBWW-5M View Product Page
This 4 color LED Strip Light combines RGB and Warm White 5050 LED Chips into a single 16.4' roll. This UL Listed LED Strip can produce over 4 billion shades of brilliant colors using 255 levels of brightness adjustment on each color. There are 3 RGB and 3 Warm White LED Chips every 4 inches. This 16.4' (5m) LED strip can be cut every 4 inches and can be reconnected by soldering or our quick connectors to bare lead wire. Comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 75W of constant voltage 12VDC power is needed for this 16.4' strip (4.4W per foot). All colors of this LED Strip Light can be controlled using our 4 Channel RGB Controller or through 4 DMX channels in a DMX universe. This RBG LED Light strip can be used for entertainment lighting, bars, casino lights, full color cove lights, RGB backlighting, under cabinet LED lighting, stage shows, or virtually any project that requires a full range of vivid LED color. For optimal light output we recommend you connect these lights no longer than 20ft in series. This product comes with two quick connectors to bare lead wire. See link below for demonstration video. This strip light is UL Listed, RoHS and CE approved.
Mean Well LED Power Supply Three Output 200W - 12VDC
SKU: PS-MW-200-12 View Product Page
A Mean Well 200W 12VDC LED Power Supply / Transformer, with a selectable AC input of either 100-120VAC or 200-240AC and 12VDC output through three terminals. Simple to use screw down style terminals make for an easy and secure connection. Built in short circuit, overload, over voltage, and over heating shut down protection guards the unit from any improper use. This power supply can also withstand a 300VAC input surge for up to 5 seconds. It can be used to connect 12VDC LED Modules, LED Lights, LED Light Ribbons, RGB LED lighting and other 12VDC Constant Voltage LED Lighting products. UL Recognized, RoHs and CE approved. Can connect up to 180 one watt led lights. Only install face up or in a manner that the cooling grate faces upwards with sufficient breathing space.
Note: * Indicates a required field
filled the void perfectly
put color changing around a pool and needed something to offset the load. this worked perfectly
Oct 28, 2019 | david sloan
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
