SKU: LN-DX-NEA-AP-15
This product is a 1 meter long (3.28ft) aluminum track for mounting our flat top single color LED neon flex. This product is intended only for our 8mm white and warm white side emitting neon flex strips listed below. Each 3.28 foot of mounting track includes two 1" long self tapping screws. The track is designed with extra space for screw heads so there is no need to counter sink. Easily install the track by screw mount and then pushing the LED neon flex strip into place. This track enables smooth and straight linear lighting, with no sags, annoying light dots or hot spots. Please note that factory wire leads, end caps, and connectors do not fit inside the track.
White LED Neon Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)
SKU: LN-DX-NE-WH-FH-5 View Product Page
Our thin and flat topped side emitting LED neon white flex rolls have an 8mm strip inside to create a smooth, shadow free 6000K linear lighting from a smaller profile. These strips are easy to conceal and not overly bright to blind someone staring directly at them. They are perfect for making signs, designs on walls, embedding into surfaces, architecture, landscaping, or any indoor or outdoor application. The IP67 silicone housing creates a dust and water tight seal, while diffusing the LEDs below for no visible dots or hot spots. Use any of the glue and solder free quick connect options to make easy splices and connections throughout the flex strip. This strip is designed to bend on a horizontal axis and requires clips or mounting profile to adhere. Each 5 meter roll (16.4ft) includes one solder assembly wire lead, one end cap, 10 mounting clips and 10 self tapping screws. The neon flex requires 24VDC input and a minimum of 3.51 watts per linear foot of lighting to power. An entire 16.4ft roll would need at least 58W to operate. Each strip is safety tested with ETL listed, RoHS and CE marks.
Warm White LED Neon Waterproof Horizontal Bend Side Emitting - ETL 24VDC - 197"(5m)
SKU: LN-DX-NE-WWH-FH-5 View Product Page
Our thin and flat topped side emitting LED neon warm white flex strips have an 8mm strip inside to create a smooth, shadow free 3000K linear lighting from a smaller profile. These strips are easy to conceal and not overly bright to blind someone staring directly at them. They are perfect for making signs, designs on walls, embedding into surfaces, architecture, landscaping, or any indoor or outdoor application. The IP67 silicone housing creates a dust and water tight seal, while diffusing the LEDs below for no visible dots or hot spots. Use any of the glue and solder free quick connect options to make easy splices and connections throughout the flex strip. This strip is designed to bend on a horizontal axis and requires clips or mounting profile to adhere. Each 5 meter roll (16.4ft) includes one solder assembly wire lead, one end cap, 10 mounting clips and 10 self tapping screws. The neon flex requires 24VDC input and a minimum of 3.51 watts per linear foot of lighting to power. An entire 16.4ft roll would need at least 58W to operate. Each strip is safety tested with ETL listed, RoHS and CE marks.
Note: * Indicates a required field
- There are currently no reviews for this product