Our local customers, Have Lights Will Travel, did a one time colored lighting installation for the Believe sculpture located in downtown Reno, NV. The sculpture was created by artist Jeff Schomberg and his team at The Letter Factory and was an art piece at Burning Man, later sold to the city of Reno. They used 7 of our 20" RGB Wall Washers, which are capable of projecting millions of color tones. Each letter was able to be controlled with our 10 Zone RGB Color Wheel Control Kit. The wall washers are being powered by Waterproof 24VDC Transformers. The colors are bright and vivid and the wall washers did a great job illuminating the entire piece of art.
Bright Star 20" x 2.3" Wall Washer 3 in 1 RGB - 30W, 24VDC
SKU: WW-SC-RGB4 View Product Page
This RGB LED Wall Washer is a 20" x 2.323" linear type light with 30W 24VDC rated power use. It has 10 RGB 3 in 1 LEDs to produce bright and vivid lighting on walls, buildings, ceiling and signs. This wall washer is able to produce up to 16.7 million shades of amazing color. This light fixture can project light up to 100 feet with a 50° beam angle. Mounting clips can slide and turn for custom installation and lighting angles. This light is encased in an IP67 water-resistant aluminum housing. Tempered glass and stainless fasteners give this light long lasting outdoor use. This light can be controlled by RGB or DMX controllers using a 4-pin, 3-loop common anode connection. We recommend no more than four 30 watt wall washers connected in a series. Attached male and female waterproof connection lead wires included. See Product Data Sheet and Installation Guide linked below. For easy connection of wall washers, power supplies and controllers, use the many waterproof connectors wire options. Non-submersible, CE and RoHS approved.
Color Wheel RGB 10 Zone Controller and Receiver Kit, 5-24VDC 6A/CH
SKU: LC-LT-RGBB-KIT View Product Page
This 10 zone syncing RGB LED Controller with Color Wheel remote is a one of a kind RGB LED Controller with memory and zone capabilities. Capable of 18 pre-programmed modes with speed and brightness adjustment as well as color wheel static color control. Sync an unlimited amount of 18 Amp RGB LED Receivers to up to 10 different zones within the 150ft RF Control Signal radius (line of sight) to create amazing syncing color effects in multiple locations. Easily control each zone individually, in groups, or all zones as one through the remote keypad. The color wheel remote is powered through a built in 5V lithium battery and charged using an included USB to mini USB cord. One kit includes one memory Color Wheel Remote and one Receiver. Any additional receivers can be sold separately. Watch the product video to see some of the functionality of the color wheel choices, modes, and zone control.
Mean Well Waterproof LED Power Supply 150W - 24VDC
SKU: PS-MW-150-W-24 View Product Page
A Mean Well brand Waterproof 150W, 24VDC LED transformer / power supply recommended for use with our 24VDC Wall Washer and Strip Light Products. This product requires an input voltage of 100-240VAC 2.0A or 277VAC .68A; and an output voltage of 24VDC 6.3A maximum. For wet or damp locations. This product is not meant to be directly exposed to outdoor elements. UL recognized, CE approved, IP67 waterproof.