SKU: WW-LG-RGBW-F1
Our outdoor rated color changing RGBW LED Flood lights incorporate 4 in 1 Epistar LEDs to create vibrant color changing output as well as cool white lighting for any indoor or outdoor space. An RGBW Controller is required to change the colors of the fixture as well as a 24VDC Constant Voltage power supply with a power rating more than 160W or larger depending on the amount of lights being driven (sold separately). There are 20 x 8W LEDs to project bright and vivid lighting on walls, trees, buildings, architecture, sculptures, displays and signs. With full dimming control of each color channel this fixture can output over 4 billion shades of color and can also be incorporated with other RGBW lighting products or DMX control systems. These lights can be operated by RGBW or DMX controllers using a 5-pin, 4-loop common anode connection. Each one is encased in an IP65 water-resistant aluminum alloy shell. Tempered glass and stainless fasteners give this light long lasting outdoor use. One 5 wire connector to bare lead is included with each light. This product is non-submersible and will get longest life when installed in an area protected from constant water and sun.
Click For Product Data Sheet |
RGBW Flood Connection Guide |
Click For Electrical Load Calculator |
SPECIFICATIONS | |
Model | Bright Star 4 in 1 RGB LED Flood - 160W 24V |
SKU | WW-LG-RGBW-F1 |
Dimensions | 11.0625" x 9.125" x 6.47"H |
Connection Type | 5 Wire RGBW(+) |
Input Power | 24VDC |
Watts | 160 watts |
Beam Angle | 60° |
Lumens | R:1400lm G:2200lm B:800lm W:3000lm |
Rating | IP65 |
Operating Temp | -40°~113°F |
Projecting Distance | Up to 100ft |
Max Serial Connection | Unlimited |
Warranty Period | 2 Year |
RGBW Flood Light Water-Resistant 5 Wire Connection Cable - 80"
SKU: LA-LG-RGBW-1CON View Product Page
A waterproof connector with 5 conductor 18AWG stranded wire that can be used to connect our RGBW LED flood lights to each other, to a controller or signal amplifier, or for quick and easy connection of any RGBW LED product. 80" long with screw down connections, male on one end and a female on the other end.
5 Conductor Outdoor and Waterproof Wire - 18AWG
SKU: OA-SC-5C View Product Page
This is a 5 conductor 18AWG encased outdoor and waterproof wire, made for use with our RGB Extreme Strip Light and RGB + White Strip lights. This wire can also be used for any other indoor or outdoor low voltage LED lighting projects. If used properly with our junction boxes this wire can be be fully submersible and dust concealed to supply an Control signal to as many fixtures as your junction box will allow. Wires are sold in 10ft and 50ft increments and will be shipped in one length when possible. Maximum wire lengths available is 650ft, available upon request, please call for details.
Mean Well Waterproof LED Power Supply 240W - 24VDC
SKU: PS-MW-240-W-24 View Product Page
This product is a Mean Well brand waterproof LED power converter with a 100-240VAC, or 277VAC (North America Only) input and a 24VDC 10 amp output of 240W. IP67 rated for wet or damp locations. This LED power supply can be used to power 24VDC Constant Voltage LED Wall Washers, LED Lights, LED Light Ribbons, RGB LED lighting and other 24VDC LED Lighting products. Comes with built in PFC (Power Factor Correction) as well as short circuit protection. AC input wire colors are as follow: Brown - Load, Blue - Neutral, Green - Ground. The manufacturer recommends a 92.5% max load of 222 watts. Non-submersible, non uv-proof, UL recognized, RoHS, and CE approved.
Note: * Indicates a required field
- There are currently no reviews for this product