Our customer used RGBW 4in1 Waterproof Strip Lights inside of our Siler Channel attached to the underside of his backyard eaves to create color changing eave lighting. The lights are being controlled using our wall mounted UX8 RGBW Controller. Power is being driven using a 24VDC Power Supply. The 4 in 1 RGBW strip light has the ability to create color changing effects with the addition of a pure white 5,700-6,500K output. That means that when you want a colored mood lighting you can choose a color and tone down the saturation with the addition of white. Or when you want a task lighting for grilling or yard clean up, you have the bright white light output to illuminate the patio. The project turned out amazing and the customer is more than happy with the results.
SILER Aluminum Extrusion for Waterproof Strips - .5" Deep
SKU: EX-KLWP-1 View Product Page
$18.49
$43.99
Ribbon Star 50/50, 4 in 1 Waterproof RGBW LED Strip Light - ETL 24VDC
SKU: RL-DX-4IN1-W-T View Product Page
Our 4in1 RGBW Waterproof strip light provides color changing plus single color lighting in a waterproof and customizable package. The IP67 rated strip can be cut and re-connected every 3.93" (10cm) to conform to any indoor or outdoor layout. The 4in1 chip provides denser light dispersion with color changing options and the addition of a 5700-6500K bright white output. Each roll includes a 3M long strip light in encapsulated hollow silicon housing with an 11" lead to bare wire on each end. A common anode 5 wire RGBW color controller or DMX decoder and constant voltage 24VDC power source is required to operate. Each strip light is ETL listed for class 2 circuits, RoHS and CE approved.
UX8 Wall Mount 4 Zone Wireless RGBW LED Controller with DMX Output, 5-24VDC
SKU: LC-LT-RGBW-UX8 View Product Page
Our state of the art UX8 RGBW wall mounted controller uses cutting edge technology to create customized wireless RGBW LED lighting control for your indoor lighting needs. Compatible 2.4GHz RF wireless RGBW receivers are designed to pair to the wall mount controller. Pair an unlimited amount of wireless receivers to 4 zones within the RF signal radius of 150ft (line of sight). The wall mounted unit allows you to control each zone independently or together in the groups of your choosing. With the addition of a Wifi-104 controller you can pair your wall mounted unit to your home or business WiFi network and then take control of your 4 zones and create custom DIY lighting scenes using a free smart phone application. Please note that the WiFi-104 light output is not controllable through the RGBW wall mount controller, you must use RF wireless receivers to successfully control your lights from both your phone and wall mount panel. With the addition of a DMX signal output there is also the option of using 4 Channel DMX decoders or fixtures to control your 4 lighting zones, simply set your DMX fixture to the proper address for unlimited control over 4 zones. Zone 1 = DMX address 1, Zone 2 = DMX address 5, Zone 3 = DMX address 9, and Zone 4 = DMX address 14. There are a variety of ways you can use this controller so be sure to observe the maximum load ratings of the receiver of decoder that you are using to power your low voltage RGBW LED lights. For connection examples click the wiring tab in the specification box below. One 5VDC transformer is included with each controller for powering the unit.
Receiver for WiFi-104, UX Controllers, & V5 V7 V8 Remotes, 5-24VDC 5A/CH
SKU: LC-LT-RGBW-RC
This product is a wireless zone receiver that can be paired to our WiFi-104 4 in 1 LED controller for control over 12 zones. Use this receiver to control 1, 2, 3 or 4 color constant voltage LEDs with 12 individually controllable zones. With 5A x 4CH max output this receiver can control an additional 240W of constant voltage LEDs at 12VDC or 480W at 24VDC, with a 150ft RF signal radius. This product is RoHS and CE approved.
- Click the arrow or text to reveal answers.
- Customer service representatives.
- Verified purchasers of this product.
