RGB plus Warm White LED Strip Lights are used to light the interior of a glass paneled liquor cabinet. The 4in1 RGBWW LED Strip Lights offer the perfect amount of illumination with the ability to change colors with the addition of a warm white output. An RGBW 4 Channel Controller is required to change the color, adjust brightness and play color changing modes. The strip light works only using 24 volts DC so a 24VDC Power Supply is used to change the wall power to the low voltage operating power. The results are stunning and the millions of color choices are sure to be fitting for entertaining or just kicking back with drink in hand.
Ribbon Star 50/50, 4 in 1 RGBWW LED Strip Light - ETL 24VDC
SKU: RL-DX-4IN1-WW-3M View Product Page
This innovative 4 color RGBWW LED Strip Light combines RGB and Warm White into a single 4 in 1 style 5050 LED Chip for brilliant color lighting and effects with the addition of a true warm white (2800-3200K) output. With ordinary RGB strip lights colors like white and warm white are nearly impossible to achieve. With the 4 in 1 RGBWW strip light you can choose from colored lighting for certain events or holidays, and then switch your lighting to a warm white output when functional lighting is needed, or you can always combine the RGB and warm white output for over 4 billion color options. The ETL Listed RGBWW LED Strip has (6) 4 in 1 RGBWW 5050 LED Chips every 4 inches, making the outputs twice as dense as our standard RGBWW strip. Cut this strip light every 4 inches and reconnect by soldering bare wires to the copper pads surrounding the cut points. Each 118" roll comes with 3M™ mounting tape on the back, for the best long-term mounting solution. 51W of constant voltage 24VDC power is needed for each 118" strip (5.1W per foot). The LED Strip Light can be controlled using our 4 Channel RGBW Controllers or through 4 DMX channels in a DMX universe. For optimal light output we recommend you connect these lights no longer than 30ft in series. This strip light is ETL Listed, RoHS and CE approved.
4 Knob RGBW LED Controller with Digital Display & RF Remote, 12-24V 5A/CH
SKU: LC-LF-3RGBW View Product Page
Our 4 Knob RGBW LED Controller can be used to control your 4 Color RGBW LED Strip Lights, modules, or 12-24VDC constant voltage lighting fixtures. The digital display above each knob lets you see the 0-255 dimming values of your Red, Green, Blue, and White output levels. Combining all the options of each output you can create over 4 trillion different color hues and fine tune any color that you want. 37 built in color changing effects with speed and brightness adjustments can be accessed using the RF remote control. Each of the 4 color outputs can control up to 5 amps of LED lighting, or 60 watts using 12VDC, 120 watts using 24VDC. Multiply that value over the 4 channels and you can control up to 240 watts max at 12V or 480 watts max at 24V.