This product is an 8 output DMX signal amplifier and splitter. When running a DMX Signal cable in lengths over 1,000ft the signal can easily be distorted causing improper communication between the DMX Controller and the subsequent DMX Driver/Decoder. By using this DMX Signal Amplifiers the DMX signal can be extended up to an additional 500ft in eight different locations. Simply use an XLR3 type female plug for the DMX Signal Input and an XLR3 type male plug for the DMX Signal Outputs and any 500mA 12-24VDC Power Supply to power the unit and you will easily be able to extend and split your DMX Signal free of any signal distortion.
|Model||DMX Signal Amplifier 8 DMX Signal Output|
|Dimensions||7.76"L x 4.0"W x 1.8"L|
|Constant Voltage DC Power||12VDC - 24VDC|
|Operating Temp||-4°F to 130°F|
|Warranty Period||1 Year|
DMX Signal Cable, XLR3 Male to XLR3 Female - 36"
SKU: LA-EL-DMX-CBL6 View Product Page
This is a DMX signal Cable with a XLR3 female plug on one end and XLR3 male plug on the other with 36" of lead wire in between. This cable will allow you to connect a DMX controller or device that has XLR3 output plugs to our PX24501 or 24 Channel DMX Drivers, or to daisy chain any other DMX LED Drivers with XLR3 connectors.
DMX Signal Cable, XLR3 Male to RJ45 - 36"
SKU: LA-EL-DMX-CBL View Product Page
This is a 3 foot long DMX signal Cable for any DMX application requiring XLR3 DMX output to an RJ45 DMX input. This cable will allow you to connect to a DMX controller, that has XLR3 output plugs, and any DMX Driver or controller with RJ45 connector. 36" cable included, XLR3 Male, plug on one end and RJ45 jack on the other end.